Airtac SAUD Double Rod Cylinder SAUD32X95S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD32X95S is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 95mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke95 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD32X95S
The AirTAC SAUD32X95S is a double-acting, double-rod profile cylinder. A rod protrudes from both ends, meaning the push and pull forces are identical at 345 N each way at 0.5 MPa. The extruded hard-anodized aluminum barrel makes it shorter than an ISO 15552 cylinder of the same 32 mm bore. It features a 1/8" port and an M10x1.25 rod thread.
This unit includes the -S magnet option for CMSG, DMSG or EMSG switches. The equal force yields a safe working load of roughly 207 N, or a vertical lift capacity of about 18 kg with a 2:1 safety margin. You can mount switches on the back rod cam. A Viton H seal option raises the operating ceiling from 70 C to 150 C.
Airtac SAUD Double Rod Cylinder SAUD32X95S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD32X95S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD32X95S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD32X95S Is Used
Synchronized Tool Transfer
Drives two identical pick-and-place grippers simultaneously from one piston, ensuring perfectly matched travel without twist.
Anti-Rotation Pin Insertion
Holds a dual-press pin feeder rigidly against rotational drift during vertical seating, keeping alignment true.
Rear-Cam Stroke Verification
Uses the extended back rod to trip a CMSG reed switch, confirming full extension in tight spaces where front sensors will not fit.
Is the Airtac SAUD Double Rod Cylinder SAUD32X95S the Right Cylinder?
Select this 32 mm bore if you need 345 N of equal bidirectional force over a 95 mm stroke. Step down if your application requires less push, or step up to the 40 mm bore for 528 N each way. The double-rod architecture is ideal when you need anti-rotation guidance or want to drive two tools at once. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. The included -S magnet enables electronic or reed sensing. For this 95 mm stroke, standard guide tolerances apply, but always support external side loads to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD32X95S FAQ
Because this is a double-rod cylinder, the force is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. The 1/8" port supplies air to both chambers equally.
No. A plain double-rod cylinder will drift if air is lost or the valve is centered. The adjustable 21 mm cushions only decelerate the piston near the stroke ends. You must add an external rod lock or pilot-operated check valve to hold a suspended load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD32X95S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.