Airtac SAUD Double Rod Cylinder SAUD50X35
The AirTAC Airtac SAUD Double Rod Cylinder SAUD50X35 is a genuine double-acting profile-type standard air cylinder with a Ø50mm bore and 35mm stroke, 1/4" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ50 mm
- Stroke35 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD50X35
The AirTAC SAUD50X35 is a double-acting, double-rod profile cylinder. A piston rod protrudes from both ends, meaning both faces use the identical rod-side area. This geometry yields equal push and pull force, delivering 825 N each way at 0.5 MPa. The extruded hard-anodized aluminum barrel makes the unit shorter than a standard ISO 15552 cylinder of the same 50 mm bore. It features a 1/4 inch port and M16x1.5 rod threads.
Because the rear rod extends outward, it can drive a second tool or carry a switch cam. This specific SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors. For sizing, the 825 N output at 0.5 MPa translates to a safe working load of roughly 495 N, or a vertical lift capacity of about 42 kg with a 2:1 safety margin.
Airtac SAUD Double Rod Cylinder SAUD50X35 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD50X35 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø50 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD50X35
| SAU | Profile-type standard cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD50X35 Is Used
Twin-Tool Machining
Drives two opposing spindles simultaneously from one piston, ensuring perfectly synchronized cutting or clamping operations.
Balanced Vertical Lift
Raises and lowers a 42 kg payload with equal thrust in both directions, preventing gravitational drift during descent.
Anti-Rotation Transfer
Shifts parts horizontally between stations where the dual rods prevent mechanical twist under offset loads.
Is the Airtac SAUD Double Rod Cylinder SAUD50X35 the Right Cylinder?
Choose this 50 mm bore when your application demands identical push and pull thrust, such as twin-tool machining or non-rotating anti-twist guidance. If you need less force, step down to the 40 mm bore providing 528 N both ways; if you need more, step up to the 63 mm bore offering 1402 N. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. At a 35 mm stroke, side-load stress is minimal, but always guide the load externally on longer travels. Select a model with the -S suffix if you require magnetic position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD50X35 FAQ
The force is equal in both directions because the rod exits both ends. It generates 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and 1484 N at 0.9 MPa.
No. The air cushions only decelerate the piston near the stroke ends; they do not act as a brake. For load holding, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD50X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.