Airtac SAUD Double Rod Cylinder SAUD63X10
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X10 is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 10mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke10 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X10
The AirTAC SAUD63X10 is a double-acting, double-rod profile cylinder with a 63 mm bore and 10 mm stroke. A piston rod exits both ends, meaning both faces use the rod-side area. Output is equal in both directions at 1402 N each way at 0.5 MPa. The extruded aluminium barrel keeps the body shorter than an ISO 15552 cylinder of the same bore. It uses a 3/8" port and an M16x1.5 rod thread.
Because both ends carry a rod, this model prevents rotation and provides synchronized motion for twin tooling. A computed buyer insight: the safe working load is about 841 N, yielding a vertical lift capacity of roughly 71 kg with a 2:1 margin. This specific SKU lacks a magnet, so it cannot take a magnetic sensor switch. For high heat up to 150 C, select the Viton H seal option.
Airtac SAUD Double Rod Cylinder SAUD63X10 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X10 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X10
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X10 Is Used
Gripper Synchronization
Drives twin opposing grippers simultaneously with equal push and pull force, ensuring parallel clamping on delicate parts without twist.
Double Ejector Station
Mounts an ejection tool on the front rod and a return cam on the back rod to clear molded parts from a press in a single compact cycle.
Anti-Rotation Stopper
Uses the dual rods to resist torsional deflection, holding a machining fixture rigidly steady during rapid clamping and release.
Is the Airtac SAUD Double Rod Cylinder SAUD63X10 the Right Cylinder?
Choose this 63 mm bore if you need 1402 N of equal bidirectional force at 0.5 MPa. Sizing down, the 50 mm bore provides 825 N each way; sizing up, the 80 mm bore yields 2268 N. A double rod is the right call for anti-rotation guidance or driving two tools at once. Mounting is limited to Basic, FA flange, and LB foot, matching the AirTAC SC series. Since this SKU has no magnet, you cannot mount CMSG or DMSG switches. Note that air cushions only decelerate the piston near stroke end; they do not hold the load on air loss, so add an external rod lock for suspended loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X10 FAQ
The force is equal both ways because the rod exits both ends. It outputs 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. The 3/8" port feeds both chambers equally.
No, this specific SKU lacks a internal magnet so it cannot take CMSG, DMSG, or EMSG switches. You would need the -S magnet option for slot sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.