Airtac SAUD Double Rod Cylinder SAUD63X100
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X100 is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 100mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke100 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X100
The AirTAC SAUD63X100 is a double-acting, double-rod profile cylinder. A 20mm rod exits both ends, meaning both faces use the rod-side piston area. This yields equal push and pull force of 1402 N each way at 0.5 MPa. The extruded aluminum barrel keeps the unit shorter than an ISO 15552 cylinder of the same bore.
This 63mm bore version uses a 3/8" port and M16x1.5 rod thread. Because this SKU lacks the -S magnet suffix, it cannot accept CMSG or DMSG sensors. For thermal extremes, Viton H seals raise the operating limit to 150 C. Based on the 0.5 MPa output, expect a safe working load near 841 N, or a vertical lift capacity of roughly 71 kg with a 2:1 safety margin.
Airtac SAUD Double Rod Cylinder SAUD63X100 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X100 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X100
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X100 Is Used
Twin Tool Transfer
Drives two opposing grippers simultaneously with identical 1402 N force, ensuring perfectly synchronized part handoff between stations.
Anti-Rotation Edge Guide
The dual rods prevent piston twist during web guiding, maintaining precise 100mm linear corrections without lateral drift.
Symmetric Clamping Jig
Applies equal clamping pressure from both ends of a workpiece, holding components securely for machining without deflection.
Is the Airtac SAUD Double Rod Cylinder SAUD63X100 the Right Cylinder?
Choose this 63mm bore when you need 1402 N of equal force in both directions. If your project requires less thrust, step down to the 50mm bore delivering 825 N both ways. If you need more power, the 80mm bore offers 2268 N both ways. A double-rod design is the right call for anti-rotation guidance or driving twin tooling simultaneously. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. Since the 100mm stroke is under 300mm, side-load guide concerns are minimal. Note that this non-magnetized SKU cannot host position switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X100 FAQ
The force is equal in both directions because both faces have a rod. It outputs 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. The 3/8 inch port feeds this 63mm bore.
No. The adjustable air cushions only decelerate the piston near the stroke ends; they do not act as a brake. For load holding on air loss, you must fit an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.