Airtac SAUD Double Rod Cylinder SAUD63X10S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X10S is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 10mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke10 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X10S
The AirTAC SAUD63X10S is a double-acting, double-rod profile cylinder. A rod exits both ends, meaning both faces use the rod-side area. This yields equal force in both directions, delivering 1402 N each way at 0.5 MPa. The extruded aluminum profile barrel is shorter than an ISO 15552 cylinder of the same 63 mm bore.
This 10 mm stroke unit features a built-in piston magnet (-S) for CMSG, DMSG, or EMSG switches. It uses a 3/8 inch port and M16x1.5 rod thread. For sizing, the safe working load is roughly 841 N (about 60 percent of the 0.5 MPa figure), and vertical lift capacity is about 71 kg with a 2:1 margin. A Viton H seal option raises the operating ceiling to 150 C.
Airtac SAUD Double Rod Cylinder SAUD63X10S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X10S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X10S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X10S Is Used
Synchronized Clamping
Applies 1402 N of equal force in both directions to grip and release parts from opposing sides without twist.
Twin Punch Driver
Drives two separate tooling heads simultaneously using both rod ends for mirrored manufacturing operations.
Cam Trip Sensing
Uses the protruding back rod to physically trip a limit switch or carry a magnetic sensor for confirmation.
Is the Airtac SAUD Double Rod Cylinder SAUD63X10S the Right Cylinder?
Choose this 63 mm bore when you need 1402 N of equal bidirectional force at 0.5 MPa. Step down to the 50 mm bore for 825 N, or up to the 80 mm bore for 2268 N. A double rod is the right call for anti-rotation guidance, driving twin tooling, or mounting a switch cam on the back end. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. The -S magnet enables position sensing. Since the stroke is only 10 mm, side-load risks are minimal, but always guide external loads to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X10S FAQ
Because it is a double-rod cylinder, the force is equal in both directions. It outputs 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. It uses a 3/8 inch port.
No. A plain double-rod cylinder drifts without live air; the adjustable cushions only decelerate near stroke end. For load holding, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.