Airtac SAUD Double Rod Cylinder SAUD63X110
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X110 is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 110mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke110 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X110
The AirTAC SAUD63X110 is a double-acting, double-rod profile cylinder. Because a rod exits both ends, the push and pull forces are identical at 1402 N each way at 0.5 MPa. The extruded aluminum barrel makes it shorter than an ISO 15552 cylinder of the same bore. It features a 3/8 inch port and an M16x1.5 rod thread.
This twin-rod design provides inherent anti-rotation guidance and lets you drive two tools at once. Without the -S suffix, this specific SKU lacks a magnet and cannot accept position sensors. For sizing, a safe working load is roughly 841 N, and it can vertically lift about 71 kg with a 2:1 safety margin.
Airtac SAUD Double Rod Cylinder SAUD63X110 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X110 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X110
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X110 Is Used
Twin-Tool Stamping
Drives two synchronized forming punches from one piston, ensuring perfectly balanced hitting force across a 110 mm stroke.
Dual Transfer Pusher
Pushes a workpiece forward while simultaneously retracting a return actuator on the back side, keeping cycle times tight.
Anti-Rotation Lift
Lifts a 71 kg vertical load using the equal push and pull forces without twisting, preventing guide bushing wear.
Is the Airtac SAUD Double Rod Cylinder SAUD63X110 the Right Cylinder?
Choose this 63 mm bore when you need 1402 N of equal force in both directions. If your project requires less thrust, step down to the 50 mm bore which provides 825 N both ways. If you need more power, the 80 mm bore yields 2268 N each way. A double-rod unit is the right call for anti-rotation stability or driving twin tooling. Mounting is limited to Basic, FA flange, and LB foot options, compatible with the AirTAC SC series. Since this is a non-magnet SKU, you cannot fit switches. For any stroke over 300 mm, add external side-load guides to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X110 FAQ
The force is equal in both directions because it is a double-rod design. It outputs 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. The 3/8 inch port feeds both chambers equally.
No, this specific SKU does not have the -S magnet option, so it cannot accept CMSG, DMSG, or EMSG switches. You must use external mechanical or optical sensors for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X110
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.