Airtac SAUD Double Rod Cylinder SAUD63X110S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X110S is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 110mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke110 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X110S
The AirTAC SAUD63X110S is a double-acting, double-rod profile cylinder with a 63 mm bore and 110 mm stroke. A piston rod exits both ends, meaning both faces use the identical rod-side area. This yields equal push and pull force, delivering 1402 N each way at 0.5 MPa. The extruded aluminum barrel keeps the body shorter than an ISO 15552 cylinder of the same bore.
Because the -S suffix includes a piston magnet, this model directly supports CMSG, DMSG, and EMSG switches. The 3/8 inch port and M16x1.5 rod thread handle robust airflow and mounting. For sizing, the 1402 N output at 0.5 MPa translates to a safe working load of roughly 841 N, or a vertical lift capacity of about 71 kg with a 2:1 safety margin.
Airtac SAUD Double Rod Cylinder SAUD63X110S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X110S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X110S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X110S Is Used
Twin Tool Transfer
Drives two opposing pickers simultaneously, using the equal force both ways to push and pull parts across a conveyor without twisting.
Back-End Switch Cam
Uses the protruding rear rod to physically trip an external limit switch, while the internal magnet works with CMSG sensors for dual confirmation.
Balanced Vertical Lift
Raises and lowers a 71 kg payload with a 2:1 margin, relying on the symmetric rod area to keep the lift platform perfectly level.
Is the Airtac SAUD Double Rod Cylinder SAUD63X110S the Right Cylinder?
Choose this 63 mm bore when your application demands identical force in both directions, such as anti-rotation guidance or driving twin tooling simultaneously. Stepping down, the 50 mm bore provides 825 N each way at 0.5 MPa; stepping up, the 80 mm bore yields 2268 N. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. The included magnet enables position sensing. At a 110 mm stroke, side loads are moderate, but always use external guide rails to prevent rod binding if carrying an off-center load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X110S FAQ
The force is equal in both directions because rods protrude from both ends. It generates 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa on both the push and pull strokes.
No. A plain double-rod cylinder drifts without live air; the adjustable cushions only decelerate near stroke end. For load holding on air loss, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.