Airtac SAUD Double Rod Cylinder SAUD63X145
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X145 is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 145mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke145 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X145
The AirTAC SAUD63X145 is a double-acting, double-rod profile cylinder with a 63mm bore and 145mm stroke. A rod protrudes from both ends, meaning both faces use the rod-side area. The output force is equal in both directions, delivering 1402 N each way at 0.5 MPa. The extruded aluminum barrel makes it shorter than an ISO 15552 cylinder of the same bore.
This unit features a 3/8 inch port and an M16x1.5 rod thread. Without the -S suffix, this SKU lacks a magnet and cannot take a CMSG or DMSG sensor. Based on the 1402 N figure, the safe working load is roughly 841 N, translating to a vertical lift capacity of about 71 kg with a 2:1 margin. For high-heat environments up to 150 C, specify the Viton H seal option.
Airtac SAUD Double Rod Cylinder SAUD63X145 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X145 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X145
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X145 Is Used
Twin-Spindle Machining
Drives two synchronized machining heads from one piston, ensuring parallel cutting action without twist.
Dual Transfer Arms
Powers opposing transfer arms that move parts simultaneously across a conveyor belt station.
Symmetric Lift Jig
Lifts pallets evenly using a central fixture, relying on the equal push and pull force to prevent binding.
Is the Airtac SAUD Double Rod Cylinder SAUD63X145 the Right Cylinder?
Select this 63mm bore model when your mechanism requires true anti-rotation guidance or needs to drive two tools at once. It yields 1402 N both ways at 0.5 MPa. If you need less force, the 50mm bore provides 825 N; if you need more, step up to the 80mm bore for 2268 N. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. Since the 145mm stroke is under 300mm, side-load stress is minimal, but always guide the load externally for rigid travel. Remember that a plain cylinder drifts without live air, so fit an external rod lock for held loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X145 FAQ
The force is equal in both directions because both faces lose rod area. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. Never expect a larger single-rod push value from this double-rod unit.
No. This specific SKU lacks the -S magnet option, so it cannot operate CMSG, DMSG, or EMSG switches. If you need back-end sensing or switch tripping via the rear rod, order the -S variant instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X145
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.