Airtac SAUD Double Rod Cylinder SAUD63X150
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X150 is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 150mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke150 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X150
The AirTAC SAUD63X150 is a double-acting, double-rod profile cylinder featuring a 63mm bore and 150mm stroke. Because a rod protrudes from both ends, the push and pull forces are identical at 1402 N each way at 0.5 MPa. The extruded aluminum barrel makes it shorter than a standard ISO 15552 unit of the same bore.
This model uses a 3/8 inch port and an M16x1.5 rod thread. Without the -S magnet option, this specific SKU cannot accept magnetic sensors. For sizing, the safe working load is approximately 841 N, and it can vertically lift around 71 kg with a 2:1 safety margin.
Airtac SAUD Double Rod Cylinder SAUD63X150 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X150 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X150
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X150 Is Used
Synchronized Gripper jaws
Drives opposing gripper fingers with equal force in both directions to prevent part twist during transfer.
Twin-Spindle Drilling
Carries two machining heads on one piston to advance and retract cutting tools simultaneously.
Dual Pusher Array
Pushes two separate cartons on parallel conveyor lanes using a single compact actuator body.
Is the Airtac SAUD Double Rod Cylinder SAUD63X150 the Right Cylinder?
Choose this 63mm bore delivering 1402 N both ways when you need precise anti-rotation guidance or twin tooling. If you need less force, the 50mm bore provides 825 N; for more power, the 80mm bore offers 2268 N. Mounting is limited to Basic, FA, and LB styles compatible with the AirTAC SC series. At 150mm stroke, side loads are minimal, but always guide the load externally for longer strokes. Note that this non-magnet SKU cannot host CMSG or DMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X150 FAQ
The force is equal in both directions because it is a double-rod design. It outputs 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. The 3/8 inch port feeds both chambers equally.
No, a plain cylinder drifts when air is removed; the adjustable 21mm cushions only decelerate near stroke end. Use an external rod lock or pilot-operated check valve for secure load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.