Airtac SAUD Double Rod Cylinder SAUD63X200
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X200 is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 200mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke200 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X200
The AirTAC SAUD63X200 is a double-acting, double-rod profile cylinder with a 63 mm bore and 200 mm stroke. Because a rod exits both ends, the effective area is identical on extension and retraction, delivering an equal 1402 N of thrust each way at 0.5 MPa. The extruded aluminum barrel keeps the body shorter than a standard ISO 15552 unit of the same bore, and the 3/8 inch port matches the 63 mm sizing.
This configuration suits non-rotating anti-twist guidance or twin-tool duty. A computed buyer insight: the safe working load is roughly 841 N, yielding a vertical lift capacity of about 71 kg with a 2:1 margin. This SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors. For high-heat environments up to 150 C, specify the Viton H seal option.
Airtac SAUD Double Rod Cylinder SAUD63X200 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X200 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X200
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X200 Is Used
Twin-Tool Machining
Drives two opposing tools simultaneously from one piston, utilizing the equal 1402 N force on both strokes for balanced material removal.
Anti-Rotation Lifting
Lifts loads up to 71 kg vertically with inherent resistance to twist, keeping the payload stable without external linear guides.
Synchronized Transfer
Pushes a product forward on one stroke and retracts a secondary stop on the other, keeping two conveyor lanes perfectly timed.
Is the Airtac SAUD Double Rod Cylinder SAUD63X200 the Right Cylinder?
Select this 63 mm bore (1402 N both ways at 0.5 MPa) if your application requires equal push-pull thrust or anti-rotation. Step down to the 50 mm bore for 825 N, or up to the 80 mm bore for 2268 N when more power is needed. Mounting is limited to Basic, FA flange, and LB foot styles, compatible with the AirTAC SC series. Since this is a no-magnet model, switch sensing is unavailable. At a 200 mm stroke, side-load is minimal, but always guide the load externally to prevent rod binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X200 FAQ
The double-rod design yields equal force in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. It uses a 3/8 inch port.
No, a plain SAUD cylinder drifts without live air; the adjustable cushions only decelerate near stroke end. Use an external rod lock or pilot-operated check valve for load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.