Airtac SAUD Double Rod Cylinder SAUD63X230S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X230S is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 230mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke230 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X230S
The AirTAC SAUD63X230S is a double-acting, double-rod profile cylinder. A rod exits both ends on one piston, meaning both faces use the rod-side area. This gives you equal push and pull force of 1402 N each way at 0.5 MPa. The extruded aluminium barrel keeps the body shorter than an ISO 15552 cylinder of the same bore. This unit includes a built-in piston magnet (-S) for CMSG, DMSG or EMSG switches.
With a 63 mm bore, the 3/8 inch port and M16x1.5 rod thread deliver balanced power. The equal force yields a safe working load of roughly 841 N, or a vertical lift capacity of about 71 kg with a 2:1 margin. You also get Viton H high-temperature seals as an option, raising the operating ceiling from 70 C to 150 C.
Airtac SAUD Double Rod Cylinder SAUD63X230S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X230S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X230S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X230S Is Used
Synchronized Gripper Transfer
Drives opposing grippers simultaneously with matched push and pull force to move parts between machining centers without rotation.
Twin-Tool Stamping Station
Powers two forming tools at once from a single piston, relying on the equal 1402 N force to deliver identical work on both ends.
Cam-Triggered Sorting Diverter
Uses the extended back rod to physically trip a limit switch or carry a sensor cam, confirming stroke position on a packaging line.
Is the Airtac SAUD Double Rod Cylinder SAUD63X230S the Right Cylinder?
Choose this 63 mm bore when your job demands equal force in both directions, like anti-rotation guidance or driving twin tools. Stepping down, the 50 mm bore gives 825 N each way at 0.5 MPa. Stepping up, the 80 mm bore provides 2268 N. Mounting is limited to Basic, FA flange and LB foot, matching the AirTAC SC series. At a 230 mm stroke, add external guide rails to absorb side loads and prevent binding. The -S magnet allows solid back-end sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X230S FAQ
Because a rod protrudes from both ends, the force is equal in both directions. It outputs 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa for both extension and retraction.
No. A plain SAUD cylinder drifts without live air, as the adjustable 21 mm cushions only decelerate the piston near stroke end. For secure load holding, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X230S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.