Airtac SAUD Double Rod Cylinder SAUD63X475
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X475 is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 475mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke475 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X475
The AirTAC SAUD63X475 is a double-acting, double-rod profile cylinder. Because a rod protrudes from both ends, the push and pull force is equal both ways, delivering 1402 N at 0.5 MPa. The extruded aluminum barrel makes it shorter than an ISO 15552 cylinder of the same bore. It uses a 3/8" port and an M16x1.5 rod thread.
This 63 mm bore unit provides a safe working load of roughly 841 N, which translates to a vertical lift capacity of about 71 kg with a 2:1 safety margin. A high-temperature Viton H seal option extends the operating range up to 150 C. This specific SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors.
Airtac SAUD Double Rod Cylinder SAUD63X475 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X475 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X475
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X475 Is Used
Twin-Tool Stamping
Drives two synchronized forming tools from opposite rod ends, ensuring perfectly matched timing and equal 1402 N force on both strokes.
Anti-Rotation Diverter
Uses the inherent torsional rigidity of the dual rods to push a lane diverter without twisting, eliminating the need for extra guide rails.
Dual-End Pusher
Indexes pallets from either side of a transfer line, using the second rod to mechanically trip a mechanical limit valve at stroke end.
Is the Airtac SAUD Double Rod Cylinder SAUD63X475 the Right Cylinder?
Select this 63 mm bore model for 1402 N of equal bidirectional force. If you need less power, the 50 mm bore yields 825 N both ways; for more thrust, the 80 mm bore provides 2268 N. A double rod is the right call when you need anti-rotation guidance, want to drive two tools at once, or need a back rod to trip a switch. Mounting is limited to Basic, FA, and LB styles compatible with the AirTAC SC series. Because the 475 mm stroke is long, use external guides to prevent rod bending under side loads. Remember that a plain cylinder drifts without air; add an external rod lock for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X475 FAQ
Because this is a double-rod cylinder, the force is equal in both directions. It generates 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
No, this specific SKU does not include a magnet. You must select a -S version of the SAUD cylinder to use CMSG, DMSG, or EMSG magnetic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X475
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.