Airtac SAUD Double Rod Cylinder SAUD63X50S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X50S is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 50mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke50 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X50S
The AirTAC SAUD63X50S is a double-acting, double-rod profile cylinder. A rod protrudes from both ends, meaning both faces use the rod-side area. Output force is equal in both directions, delivering 1402 N each way at 0.5 MPa. The extruded aluminum barrel keeps the unit shorter than an ISO 15552 cylinder of the same bore.
This 63 mm bore unit features a 3/8 inch port, M16x1.5 rod thread, and adjustable air cushions at both ends. The built-in magnet (-S) supports CMSG, DMSG, and EMSG switches. Based on the 1402 N figure, the safe working load is about 841 N, yielding a vertical lift capacity of roughly 71 kg with a 2:1 margin.
Airtac SAUD Double Rod Cylinder SAUD63X50S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X50S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X50S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X50S Is Used
Twin-Tool Stamping
Drives two synchronized forming tools from one piston, ensuring parallel contact and equal push or pull force.
Anti-Rotation Diverter
Uses the dual rods to prevent twist during stroke extension, keeping the diverting jaw perfectly aligned on the belt.
Cam-Triggered Sorting
Mounts a switch cam on the rear rod to trip an external sensor, confirming full retraction before sorting.
Is the Airtac SAUD Double Rod Cylinder SAUD63X50S the Right Cylinder?
Choose this 63 mm bore (1402 N both ways at 0.5 MPa) if you need more power than the 50 mm bore (825 N) but less bulk than the 80 mm bore (2268 N). A double rod is the right call for anti-rotation guidance, driving twin tooling, or mounting a switch cam on the back rod. Mounting is limited to Basic, FA, and LB styles, matching the AirTAC SC series. The -S magnet enables position sensing. With a 50 mm stroke, side-load risk is minimal, but always guide the load externally on longer strokes.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X50S FAQ
Force is equal both ways because both faces have a rod. It produces 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. The 3/8 inch port supplies air to achieve these figures.
No, the piston drifts without live air, as the cushions only decelerate near stroke end. Use an external rod lock or pilot-operated check valve for secure load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.