Airtac SAUD Double Rod Cylinder SAUD63X60S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X60S is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 60mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke60 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X60S
The AirTAC SAUD63X60S is a double-acting, double-rod profile cylinder. A rod exits both ends, meaning both faces use the rod-side area. Push and pull force are equal at 1402 N each way at 0.5 MPa. The extruded aluminum barrel makes it shorter than an ISO 15552 cylinder of the same bore.
This 63 mm bore unit has a 3/8 inch port and a 60 mm stroke. With the -S option, a built-in piston magnet supports CMSG, DMSG or EMSG switches. A computed buyer insight: safe working load is roughly 841 N, allowing a vertical lift of about 71 kg with a 2:1 margin. Viton H seals can raise the operating temperature to 150 C.
Airtac SAUD Double Rod Cylinder SAUD63X60S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X60S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X60S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X60S Is Used
Twin Tool Drive
Drives two opposing forming tools simultaneously with identical 1402 N force, keeping stroke ends perfectly synchronized.
Back-Rod Sensing
Uses the protruding rear rod to trip an external CMSG switch cam, confirming home position without cluttering the active tool face.
Anti-Rotation Clamp
Applies non-rotating clamping pressure on a machining fixture, preventing workpiece twist during a milling operation.
Is the Airtac SAUD Double Rod Cylinder SAUD63X60S the Right Cylinder?
Select this 63 mm bore model delivering 1402 N equal force both ways at 0.5 MPa. If you need less force, step down to the 50 mm bore (825 N); for more power, step up to the 80 mm bore (2268 N). A double rod is the right call for anti-rotation guidance, driving twin tooling, or mounting a switch cam on the back rod. Mounting is limited to Basic, FA flange, and LB foot, matching the AirTAC SC series. For this 60 mm stroke, side loads are minimal, but always guide external loads to prevent binding. The -S magnet enables position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X60S FAQ
Because it is a double-rod cylinder, force is equal in both directions. It outputs 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. The 3/8 inch port feeds both chambers equally.
No. The adjustable air cushion only decelerates the piston near stroke end; it does not brake or lock. For load holding on air loss, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.