Airtac SAUD Double Rod Cylinder SAUD63X65S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X65S is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 65mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke65 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X65S
The AirTAC SAUD63X65S is a double-acting, double-rod profile cylinder. A rod protrudes from both ends, meaning push and pull forces are identical at 1402 N each way at 0.5 MPa. The extruded aluminum barrel is shorter than a standard ISO 15552 unit of the same bore. This 63 mm bore uses a 3/8 inch port and includes a built-in magnet for position sensing.
Because both faces share the same rod-side area, the output is perfectly balanced. The -S suffix enables CMSG, DMSG, or EMSG switches to track piston travel along the body. For sizing, a safe working load is roughly 841 N, allowing a vertical lift of about 71 kg with a 2:1 margin. A high-temperature Viton H seal option extends operation from 0 to 150 C.
Airtac SAUD Double Rod Cylinder SAUD63X65S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X65S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X65S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X65S Is Used
Twin-Spindle Drilling
Drives two synchronized machining heads from one piston, ensuring perfectly balanced feed rates and equal force during the cutting cycle.
Dual-Arm Transfer
Picks and places parts simultaneously from both rod ends, cutting cycle time in half while maintaining precise non-rotating alignment.
Cam-Triggered Sorting
Uses the protruding back rod as a mechanical cam to trip an external limit switch, providing a hard mechanical confirmation signal.
Is the Airtac SAUD Double Rod Cylinder SAUD63X65S the Right Cylinder?
Choose this 63 mm bore when you need 1402 N of equal bidirectional force. If your application requires less thrust, the 50 mm bore provides 825 N both ways; if you need more, step up to the 80 mm bore for 2268 N. A double-rod design is ideal for anti-rotation guidance, driving twin tooling, or mounting a sensor cam on the back rod. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. Since the 65 mm stroke is short, side-load stress is minimal, but always guide the load externally on longer strokes. The included magnet supports CMSG, DMSG, and EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X65S FAQ
The force is equal in both directions because it is a double-rod design. It outputs 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. The 3/8 inch port feeds both chambers equally.
No, a plain double-rod cylinder drifts without live air, as the adjustable 21 mm cushions only decelerate near stroke end. For secure load holding, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X65S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.