Airtac SAUD Double Rod Cylinder SAUD63X900S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X900S is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 900mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke900 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X900S
The AirTAC SAUD63X900S is a double-acting, double-rod profile cylinder. A rod exits both ends, meaning both faces use the rod-side area and push and pull force are equal at 1402 N each way at 0.5 MPa. The extruded aluminium profile barrel is shorter than an ISO 15552 cylinder of the same bore. It features a 3/8 inch port and an M16x1.5 rod thread.
This 900 mm stroke unit includes a built-in piston magnet (-S) for CMSG, DMSG, or EMSG switches. The adjustable air cushion is 21 mm at each end. For sizing, a safe working load is roughly 841 N (about 60 percent of the 0.5 MPa figure), yielding a vertical lift capacity of about 71 kg with a 2:1 margin. A Viton H seal option raises the operating temperature to 0-150 C.
Airtac SAUD Double Rod Cylinder SAUD63X900S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X900S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X900S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X900S Is Used
Synchronized Transfer
Drives two parallel pick-and-place arms from one piston, keeping motion perfectly synchronized without twisting.
Cam-Actuated Switching
Uses the protruding back rod to physically trip a limit valve or carry a switch cam in tight machinery.
Twin-Spindle Lifting
Lifts and lowers dual machining spindles with equal push and pull force, preventing binding on long 900 mm moves.
Is the Airtac SAUD Double Rod Cylinder SAUD63X900S the Right Cylinder?
When sizing this double-rod unit, compare both ways: the 50 mm bore yields 825 N, while the 80 mm bore yields 2268 N at 0.5 MPa. Choose this 63 mm model when you need anti-rotation guidance, twin tooling, or back-end sensing. Mounting is limited to Basic, FA, and LB types, matching the AirTAC SC series. Because the stroke is 900 mm, you must use external guides to prevent rod bending under side loads. The -S magnet allows position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X900S FAQ
The force is equal both ways because both faces use the rod-side area. It outputs 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
No, a plain cylinder drifts on air loss; the 21 mm cushion only decelerates near stroke end. For a held load, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X900S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.