Airtac SAUD Double Rod Cylinder SAUD63X95
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X95 is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 95mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke95 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X95
The AirTAC SAUD63X95 is a double-acting, double-rod profile cylinder. A 20mm rod exits both ends of the hard-anodized extruded aluminium barrel, meaning both faces use the rod-side piston area. This yields identical push and pull thrust of 1402 N at 0.5 MPa. The unit is notably shorter than an ISO 15552 cylinder of the same bore and uses a 3/8 inch port.
Because the twin rods resist torsional twist, this model suits non-rotating guidance tasks. With a 1402 N equal thrust, your safe working load is roughly 841 N, translating to a vertical lift capacity of about 71 kg with a 2:1 safety margin. Note this specific SKU lacks a magnet, so it cannot host CMSG or DMSG sensors. For high heat up to 150 C, specify the Viton H seal option.
Airtac SAUD Double Rod Cylinder SAUD63X95 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X95 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X95
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X95 Is Used
Twin-Tool Transfer
Drives two opposing pickers simultaneously so parts transfer between stations without skewing.
Anti-Rotation Gauging
Holds a metrology probe rigidly on the front face while the back rod pushes a datum stop.
Balanced Lift Station
Raises and lowers a 71kg platen vertically with equal force, preventing sag on the return stroke.
Is the Airtac SAUD Double Rod Cylinder SAUD63X95 the Right Cylinder?
Choose this 63mm bore delivering 1402 N both ways when you need synchronized motion or anti-twist stability. If moving down, the 50mm bore offers 825 N; if scaling up, the 80mm bore provides 2268 N. Mounting is limited to Basic, FA flange, or LB foot, matching the AirTAC SC series. At 95mm stroke side-load is minimal, but always guide the load externally on longer travels. This non-magnetic version cannot accept switches; order the -S suffix for sensor readiness. Remember the cushion only decelerates; add a pilot-operated check valve to hold loads on air loss.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X95 FAQ
Being a double-rod cylinder, the force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa. The 3/8 inch port and 20mm rods ensure these identical push and pull figures.
No, this specific SKU does not include a magnet. You cannot fit CMSG, DMSG, or EMSG switches. To use magnetic sensing on the extruded profile, you must order the SAUD63X95-S variant instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X95
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.