Airtac SAUD Double Rod Cylinder SAUD63X950
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X950 is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 950mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke950 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X950
The AirTAC SAUD63X950 is a double-acting, double-rod profile cylinder. A rod protrudes from both ends, meaning both faces use the rod-side area. This yields an equal push and pull force of 1402 N each way at 0.5 MPa. The extruded aluminium barrel keeps the unit shorter than an ISO 15552 cylinder of the same bore. It uses a 3/8 inch port and an M16x1.5 rod thread.
This 950 mm stroke length demands external guidance to prevent rod bending under side loads. Because this SKU lacks a magnet, it cannot take a magnetic switch. For high heat up to 150 C, specify the Viton H seal option. A computed buyer insight: the safe working load is roughly 841 N, allowing a vertical lift of about 71 kg with a 2:1 margin.
Airtac SAUD Double Rod Cylinder SAUD63X950 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X950 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X950
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X950 Is Used
Dual-Tool Transfer
Drives two synchronized pushers on a conveyor line, using the twin rods to move parts evenly without twisting.
Lift and Lower Station
Raises and lowers a 71 kg vertical load with equal force both ways, maintaining smooth balance throughout the 950 mm travel.
Gripper Carriage
Shifts a heavy gripper carriage along a long bed, relying on the rigid double rod to prevent yaw during rapid strokes.
Is the Airtac SAUD Double Rod Cylinder SAUD63X950 the Right Cylinder?
Choose this 63 mm bore when you need 1402 N of equal force in both directions over a 950 mm stroke. Step down to a 50 mm bore for 825 N, or up to an 80 mm bore for 2268 N. A double rod is the right call for anti-rotation guidance or driving twin tools. Mounting is limited to Basic, FA flange, and LB foot, matching the AirTAC SC series. At 950 mm, always use an external guide to absorb side loads and prevent rod bending. This non-magnet SKU cannot host sensors; add the -S suffix for CMSG or DMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X950 FAQ
The force is equal both ways because both ends carry a rod. It outputs 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
No. A plain cylinder drifts on air loss; the adjustable cushion only decelerates near stroke end. Use an external rod lock or pilot-operated check valve to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X950
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.