Airtac SAUD Double Rod Cylinder SAUD63X95S
The AirTAC Airtac SAUD Double Rod Cylinder SAUD63X95S is a genuine double-acting profile-type standard air cylinder with a Ø63mm bore and 95mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ63 mm
- Stroke95 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD63X95S
The AirTAC SAUD63X95S is a double-acting, double-rod profile cylinder. A 63mm bore with a 95mm stroke yields an equal push and pull force of 1402N at 0.5MPa. The 3/8 inch port feeds both chambers, and because a 20mm rod exits each end, the effective area is identical in both directions.
This extruded aluminum body is shorter than an ISO 15552 unit of the same bore. The built-in magnet (-S) supports CMSG, DMSG and EMSG switches. Based on the 0.5MPa rating, expect a safe working load around 841N, or a vertical lift capacity of about 71kg with a 2:1 margin.
Airtac SAUD Double Rod Cylinder SAUD63X95S Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD63X95S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø63 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD63X95S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD63X95S Is Used
Twin-Spindle Drilling
Drives two opposing drill heads simultaneously with matched force, ensuring parallel hole depth without rotational twist.
Dual-End Transfer Pusher
Pushes a workpiece forward on the outbound stroke while retracting a secondary stopper on the back rod for synchronized indexing.
Vertical Lift Gate
Raises and lowers a 71kg gate evenly using the equal bidirectional force, preventing sagging during the descent phase.
Is the Airtac SAUD Double Rod Cylinder SAUD63X95S the Right Cylinder?
Size up or down by checking the neighboring bores: the 50mm bore gives 825N each way at 0.5MPa, while the 80mm bore provides 2268N. Choose this 63mm double-rod unit when you need anti-rotation guidance, twin tooling, or a back-end sensor cam. Mounting is limited to Basic, FA, and LB styles (matching the AirTAC SC series). The -S magnet allows position sensing. For this 95mm stroke, ensure external guides carry any side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD63X95S FAQ
The force is equal in both directions due to the double rods. It outputs 1402N at 0.5MPa, 1962N at 0.7MPa, and 2523N at 0.9MPa.
No, the air cushion only decelerates the piston near the end caps. To hold a load securely, you must add an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD63X95S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.