Airtac SDAD Double Rod Slim Cylinder SDAD16X5B
The AirTAC Airtac SDAD Double Rod Slim Cylinder SDAD16X5B is a genuine double-acting COMPACT cylinder with a piston rod out BOTH ends (Ø16mm bore, 5mm stroke). The through-rod resists twisting and lets you drive a tool on one end while a switch or dog reads position on the other — with identical force in both directions.
- BoreØ16 mm
- Stroke5 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM3×0.5 (F) / M5×0.8 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAD Double Rod Slim Cylinder SDAD16X5B
The AirTAC SDAD16X5B is a compact double-acting cylinder featuring a 6 mm piston rod exiting both ends of its short riveted body. Because the rod occupies both chambers, the annular area is identical on extend and retract, yielding exactly 86.4 N of push and pull force at 0.5 MPa. This symmetric output is ideal for balanced tooling.
This specific SKU includes male M5x0.8 threads on both rod ends for direct mechanical mounting. It lacks a piston magnet, so position sensing is not possible without switching to an -S variant. The fixed NBR bumper at each end absorbs end-of-stroke shock without adding axial length.
Airtac SDAD Double Rod Slim Cylinder SDAD16X5B Technical Specifications
| Model | Airtac SDAD Double Rod Slim Cylinder SDAD16X5B |
|---|---|
| Series | SDAD compact double-rod cylinder |
| Bore size | Ø16 mm |
| Stroke | 5 mm |
| Acting type | Double acting, rod both ends |
| Port size | M5×0.8 |
| Rod end thread | M3×0.5 female / M5×0.8 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 50 mm |
Because a rod occupies both cylinder chambers, the effective area — and therefore the force — is identical in both directions. Specifications follow the official AirTAC SDAD datasheet.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 86 N |
| 0.7 MPa | 121 N |
| Max (@1.0 MPa) | 18 kgf |
Force uses the annular (rod-side) area on both strokes, so extend and retract match. Actual usable force is lower than theoretical due to friction. Size with a safety margin.
Model Code: Airtac SDAD Double Rod Slim Cylinder SDAD16X5B
| SDAD | Compact double-acting cylinder, rod out both ends. |
|---|---|
| 16 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rods (omit = female thread). |
Thread: PT standard. Related SDA-family variants: SDA (single rod), SSA/STA (single acting), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAD Double Rod Slim Cylinder SDAD16X5B Is Used
Micro-Grip Ejector
Uses the equal 86.4 N push-pull force to symmetrically eject small electronic components without rotating the gripper assembly.
Short-Stroke Pin Press
Leverages the 5 mm stroke and male M5x0.8 rods to drive a small pinning head while a return spring acts on the opposite rod end.
Dual-End Transfer Jaw
Mounts a pickup jaw on one end and a mechanical dog on the other, taking advantage of the anti-twist through-rod in a confined riveted body.
Is the Airtac SDAD Double Rod Slim Cylinder SDAD16X5B the Right Cylinder?
When sizing this 16 mm bore, the smaller SDAD12 provides 42.4 N at 0.5 MPa, while the larger SDAD20 offers 131.9 N. The 86.4 N output here gives a safe working load of roughly 52 N (about 60 percent of capacity) and a vertical lift capability near 4.4 kg with a 2:1 safety margin. The through-rod design prevents twisting during transit, allowing you to drive a tool on one side while clearing a dog on the opposite end.
Confirm the 5 mm stroke, M5x0.8 air port, and male M5x0.8 rod threads suit your fixture. Note that this plain cylinder does not hold position if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need equal force both directions?
- ✓ Anti-rotation / dual-end mounting?
- ✓ Space for a rod that exits both ends
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rod exiting both ends.
- check Avoid side load on either rod end.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAD Double Rod Slim Cylinder SDAD16X5B FAQ
The double-rod design provides equal force in both directions: 86.4 N at 0.5 MPa, 121 N at 0.7 MPa, and a theoretical maximum of 18 kgf at 1.0 MPa.
Yes. The through-rod protrudes from both sides with male M5x0.8 threads, allowing you to drive a load on one end and mount a dog on the other while resisting rotation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAD Cylinders
Request a Quote for Airtac SDAD Double Rod Slim Cylinder SDAD16X5B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.