Airtac SDAD Double Rod Slim Cylinder SDAD32X10
The AirTAC Airtac SDAD Double Rod Slim Cylinder SDAD32X10 is a genuine double-acting COMPACT cylinder with a piston rod out BOTH ends (Ø32mm bore, 10mm stroke). The through-rod resists twisting and lets you drive a tool on one end while a switch or dog reads position on the other — with identical force in both directions.
- BoreØ32 mm
- Stroke10 mm
- Port sizePT1/8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAD Double Rod Slim Cylinder SDAD32X10
The AirTAC SDAD32X10 is a double-acting compact cylinder featuring a 32 mm bore and a 10 mm stroke. Because the 12 mm piston rod exits both ends of the riveted body, the annular area remains identical in both chambers. This geometry ensures push and pull forces match exactly at 345.6 N each way under 0.5 MPa, yielding a safe working load of roughly 207 N at a 60 percent margin.
The through-rod design inherently resists twisting, allowing you to mount a work tool on one end and a dog or stop on the opposite side. End-of-stroke energy is managed solely by a fixed NBR bumper that decelerates the piston, rather than an adjustable air cushion. This unit lacks a piston magnet, so position sensing requires the -S variant to host reed or solid-state switches.
Airtac SDAD Double Rod Slim Cylinder SDAD32X10 Technical Specifications
| Model | Airtac SDAD Double Rod Slim Cylinder SDAD32X10 |
|---|---|
| Series | SDAD compact double-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting, rod both ends |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Because a rod occupies both cylinder chambers, the effective area — and therefore the force — is identical in both directions. Specifications follow the official AirTAC SDAD datasheet.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Force uses the annular (rod-side) area on both strokes, so extend and retract match. Actual usable force is lower than theoretical due to friction. Size with a safety margin.
Model Code: Airtac SDAD Double Rod Slim Cylinder SDAD32X10
| SDAD | Compact double-acting cylinder, rod out both ends. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rods (omit = female thread). |
Thread: PT standard. Related SDA-family variants: SDA (single rod), SSA/STA (single acting), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAD Double Rod Slim Cylinder SDAD32X10 Is Used
Gripper Jaw Sync
Drives opposing gripper jaws with equal 345.6 N push and pull forces, ensuring parts are clamped securely without rotational twist.
Dual-End Diverter
Uses the through-rod exiting both ends to push a diverter gate on one side while mounting a physical stop dog on the opposite end.
Short-Stroke Straightener
Fits into tight 10 mm stroke machinery gaps to press and align light components, relying on the fixed NBR bumper to absorb end impacts.
Is the Airtac SDAD Double Rod Slim Cylinder SDAD32X10 the Right Cylinder?
When sizing this 32 mm bore model, consider the neighboring options. Stepping down to the SDAD25 provides 206.2 N at 0.5 MPa, while moving up to the SDAD40 delivers 527.8 N at 0.5 MPa. This SDAD32X10 configuration provides 483.8 N at 0.7 MPa and a theoretical maximum of 70 kgf at 1.0 MPa in both directions.
The dual-end rod provides excellent anti-rotation stability for symmetric loads, but a plain cylinder will drift and cannot hold a vertical load if air pressure drops or the valve centers. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. This SKU features a PT1/8 port, female M6x1.0 rod-end threads, and no magnet.
Quick checklist
- ✓ Need equal force both directions?
- ✓ Anti-rotation / dual-end mounting?
- ✓ Space for a rod that exits both ends
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rod exiting both ends.
- check Avoid side load on either rod end.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAD Double Rod Slim Cylinder SDAD32X10 FAQ
The force is equal in both directions due to the double-rod design. It generates 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a theoretical maximum of 70 kgf at 1.0 MPa. The maximum operating pressure is 1.0 MPa.
Yes, the 12 mm through-rod exits both sides of the body, allowing you to drive a tool on one end and mount a dog on the other. Note that this specific SKU lacks a piston magnet, so position sensing requires the -S variant for reed or electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAD Cylinders
Request a Quote for Airtac SDAD Double Rod Slim Cylinder SDAD32X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.