Airtac SDAD Double Rod Slim Cylinder SDAD32X100B
The AirTAC Airtac SDAD Double Rod Slim Cylinder SDAD32X100B is a genuine double-acting COMPACT cylinder with a piston rod out BOTH ends (Ø32mm bore, 100mm stroke). The through-rod resists twisting and lets you drive a tool on one end while a switch or dog reads position on the other — with identical force in both directions.
- BoreØ32 mm
- Stroke100 mm
- Port sizePT1/8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAD Double Rod Slim Cylinder SDAD32X100B
The AirTAC SDAD32X100B is a double-acting compact cylinder featuring a 32 mm bore and 100 mm stroke, with piston rods exiting both ends. Because a rod occupies each chamber, the annular area is identical on extend and retract, yielding equal push and pull force of 345.6 N at 0.5 MPa. This symmetric output is ideal for balanced loads, while the through-rod geometry inherently resists twisting during operation.
This specific SKU includes male M10x1.25 thread on both rod ends and lacks a piston magnet. The short riveted body minimizes axial mounting depth where standard cylinders cannot fit. End-of-stroke deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, and the 12 mm rod diameter handles a safe working load of roughly 207 N, allowing a vertical lift of about 17.6 kg with a 2:1 margin.
Airtac SDAD Double Rod Slim Cylinder SDAD32X100B Technical Specifications
| Model | Airtac SDAD Double Rod Slim Cylinder SDAD32X100B |
|---|---|
| Series | SDAD compact double-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting, rod both ends |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Because a rod occupies both cylinder chambers, the effective area — and therefore the force — is identical in both directions. Specifications follow the official AirTAC SDAD datasheet.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Force uses the annular (rod-side) area on both strokes, so extend and retract match. Actual usable force is lower than theoretical due to friction. Size with a safety margin.
Model Code: Airtac SDAD Double Rod Slim Cylinder SDAD32X100B
| SDAD | Compact double-acting cylinder, rod out both ends. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rods (omit = female thread). |
Thread: PT standard. Related SDA-family variants: SDA (single rod), SSA/STA (single acting), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAD Double Rod Slim Cylinder SDAD32X100B Is Used
Symmetric Transfer Arm
Drives a pick-and-place arm where the equal 345.6 N push and pull force prevents load imbalance during bi-directional part transfers.
Dual-End Gauging Station
Uses the anti-rotation through-rod to mount a machining fixture on one end and a measurement dog on the opposite end for inline inspection.
Vertical Lift Jig
Raises an 18 kg workpiece using the male M10x1.25 threads, maintaining a 2:1 safety margin on the 0.5 MPa pressure rating.
Is the Airtac SDAD Double Rod Slim Cylinder SDAD32X100B the Right Cylinder?
When sizing this 32 mm bore unit, consider the neighboring bores: stepping down to SDAD25 provides 206.2 N at 0.5 MPa, while stepping up to SDAD40 yields 527.8 N at 0.5 MPa. This model provides 345.6 N at 0.5 MPa (483.8 N at 0.7 MPa), striking a balance for medium-duty tasks. The dual-end through-rod allows mounting a tool on one side and a dog on the opposite end simultaneously.
Confirm the 100 mm stroke is within your axial envelope, noting the PT1/8 port and male M10x1.25 rod threads on both ends. Because this SKU lacks the -S magnet, position sensing is not possible without switching to an -S variant. Remember that a plain cylinder drifts when air is lost or the valve is centered; utilize an external rod lock or pilot-operated check valve for load holding.
Quick checklist
- ✓ Need equal force both directions?
- ✓ Anti-rotation / dual-end mounting?
- ✓ Space for a rod that exits both ends
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rod exiting both ends.
- check Avoid side load on either rod end.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAD Double Rod Slim Cylinder SDAD32X100B FAQ
The double-rod design provides equal force in both directions: 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a theoretical maximum of 70 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa.
No, this specific SKU does not include a piston magnet. You must select an -S variant to use AirTAC reed or electronic switches. The through-rod design still allows dual-end mounting without sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAD Cylinders
Request a Quote for Airtac SDAD Double Rod Slim Cylinder SDAD32X100B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.