Airtac SDAD Double Rod Slim Cylinder SDAD32X110S
The AirTAC Airtac SDAD Double Rod Slim Cylinder SDAD32X110S is a genuine double-acting COMPACT cylinder with a piston rod out BOTH ends (Ø32mm bore, 110mm stroke). The through-rod resists twisting and lets you drive a tool on one end while a switch or dog reads position on the other — with identical force in both directions.
- BoreØ32 mm
- Stroke110 mm
- Port sizePT1/8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAD Double Rod Slim Cylinder SDAD32X110S
The AirTAC SDAD32X110S is a double-acting, double-rod compact cylinder featuring a 32mm bore and 110mm stroke. Because the piston rod exits both ends, the annular area remains identical in both chambers, ensuring push force equals pull force at 345.6 N each way under 0.5 MPa. This symmetric thrust is ideal for balanced actuation tasks.
The through-rod geometry inherently resists twisting, allowing you to mount a work tool on one end while fitting a dog or reed/electronic switch on the opposite end. Equipped with a built-in magnet (-S), it slots neatly into tight spaces using a short riveted body, and the fixed NBR bumper absorbs end-of-stroke shocks without requiring adjustable cushioning.
Airtac SDAD Double Rod Slim Cylinder SDAD32X110S Technical Specifications
| Model | Airtac SDAD Double Rod Slim Cylinder SDAD32X110S |
|---|---|
| Series | SDAD compact double-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, rod both ends |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Because a rod occupies both cylinder chambers, the effective area — and therefore the force — is identical in both directions. Specifications follow the official AirTAC SDAD datasheet.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Force uses the annular (rod-side) area on both strokes, so extend and retract match. Actual usable force is lower than theoretical due to friction. Size with a safety margin.
Model Code: Airtac SDAD Double Rod Slim Cylinder SDAD32X110S
| SDAD | Compact double-acting cylinder, rod out both ends. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rods (omit = female thread). |
Thread: PT standard. Related SDA-family variants: SDA (single rod), SSA/STA (single acting), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAD Double Rod Slim Cylinder SDAD32X110S Is Used
Symmetric Transfer Unit
Drives a pick-and-place head on one end while the opposite rod end triggers a reed switch, utilizing the equal 345.6 N push/pull force for stable part transfer.
Balanced Lift Station
Raises and lowers a 17.6 kg fixture with a 2:1 safety margin, relying on the through-rod to prevent twist during vertical ascent and descent.
Twin-Tool Machining Stop
Mounts a clamping jaw on one side and a mechanical dog on the other, saving axial footprint in a tight machine cell while delivering 483.8 N at 0.7 MPa.
Is the Airtac SDAD Double Rod Slim Cylinder SDAD32X110S the Right Cylinder?
When sizing this unit, consider the adjacent bores: stepping down to SDAD25 yields 206.2 N at 0.5 MPa, while stepping up to SDAD40 provides 527.8 N. The 32mm bore strikes a middle ground, offering a safe working load around 207 N (60% of the 0.5 MPa rating) and a vertical lift capacity of roughly 17.6 kg with a 2:1 safety margin.
This configuration includes a 12mm rod diameter, female M6x1.0 rod-end threads, and a PT1/8 port. Remember that a standard cylinder drifts when air pressure is lost or the valve centers, so integrate an external rod lock or pilot-operated check valve if you need strict load holding. The fixed NBR bumper decelerates the stroke end but does not act as a brake.
Quick checklist
- ✓ Need equal force both directions?
- ✓ Anti-rotation / dual-end mounting?
- ✓ Space for a rod that exits both ends
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rod exiting both ends.
- check Avoid side load on either rod end.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAD Double Rod Slim Cylinder SDAD32X110S FAQ
Because it is a double-rod cylinder, the force is identical in both directions: 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a theoretical maximum of 70 kgf at 1.0 MPa.
The through-rod prevents rotation and allows mounting tools or switches on both ends simultaneously. The -S option includes a built-in piston magnet for direct mounting of AirTAC reed or electronic switches along the body grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAD Cylinders
Request a Quote for Airtac SDAD Double Rod Slim Cylinder SDAD32X110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.