Airtac SDAD Double Rod Slim Cylinder SDAD32X75SB
The AirTAC Airtac SDAD Double Rod Slim Cylinder SDAD32X75SB is a genuine double-acting COMPACT cylinder with a piston rod out BOTH ends (Ø32mm bore, 75mm stroke). The through-rod resists twisting and lets you drive a tool on one end while a switch or dog reads position on the other — with identical force in both directions.
- BoreØ32 mm
- Stroke75 mm
- Port sizePT1/8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAD Double Rod Slim Cylinder SDAD32X75SB
The AirTAC SDAD32X75SB is a double-acting, double-rod compact cylinder featuring a 32 mm bore and a 75 mm stroke. Because the piston rod extends from both ends, the annular area remains identical in both chambers, ensuring push force equals pull force at 345.6 N each way under 0.5 MPa. This symmetric thrust is ideal for balanced actuation tasks.
Equipped with a built-in magnet (-S) for AirTAC reed or electronic switches, and male M10x1.25 threads (-B) on both 12 mm rod ends, it offers versatile dual-end mounting. The short riveted body saves axial depth, while the fixed NBR bumper decelerates the stroke ends. Operating speed ranges from 30 to 500 mm/s.
Airtac SDAD Double Rod Slim Cylinder SDAD32X75SB Technical Specifications
| Model | Airtac SDAD Double Rod Slim Cylinder SDAD32X75SB |
|---|---|
| Series | SDAD compact double-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, rod both ends |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Because a rod occupies both cylinder chambers, the effective area — and therefore the force — is identical in both directions. Specifications follow the official AirTAC SDAD datasheet.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Force uses the annular (rod-side) area on both strokes, so extend and retract match. Actual usable force is lower than theoretical due to friction. Size with a safety margin.
Model Code: Airtac SDAD Double Rod Slim Cylinder SDAD32X75SB
| SDAD | Compact double-acting cylinder, rod out both ends. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rods (omit = female thread). |
Thread: PT standard. Related SDA-family variants: SDA (single rod), SSA/STA (single acting), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAD Double Rod Slim Cylinder SDAD32X75SB Is Used
Web Guiding Mechanism
Utilizes the equal 345.6 N push and pull force to tension and guide material evenly without skewing, leveraging the anti-rotation through-rod for precise tracking.
Dual-End Transfer Shuttle
Mounts a grip on the front male M10 rod and a magnetic dog on the rear, triggering an electronic switch to confirm part hand-off at 75 mm stroke.
Compact Component Ejector
Saves axial machine space with its short riveted body while pushing and pulling a 17.6 kg assembly off a conveyor using both threaded rod ends.
Is the Airtac SDAD Double Rod Slim Cylinder SDAD32X75SB the Right Cylinder?
When sizing this model, consider the neighboring bores: stepping down to SDAD25 yields 206.2 N at 0.5 MPa, while stepping up to SDAD40 provides 527.8 N. The SDAD32X75SB provides a safe working load of roughly 207 N (about 60% of its 345.6 N capacity) and can vertically lift approximately 17.6 kg with a 2:1 safety margin.
The through-rod design prevents twisting and allows mounting a tool on one end and a position dog on the other. Remember that a plain cylinder drifts when air is lost or the valve is centered; use an external rod lock or pilot-operated check valve for load holding. This configuration includes the -S magnet and -B male M10x1.25 rod threads, with a PT1/8 port.
Quick checklist
- ✓ Need equal force both directions?
- ✓ Anti-rotation / dual-end mounting?
- ✓ Space for a rod that exits both ends
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rod exiting both ends.
- check Avoid side load on either rod end.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAD Double Rod Slim Cylinder SDAD32X75SB FAQ
The double-rod design provides equal force in both directions: 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a theoretical maximum of 70 kgf at 1.0 MPa.
The through-rod resists twisting under load and allows you to mount a tool on one male M10x1.25 end while using the opposite end to trigger a reed or electronic switch via the built-in magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAD Cylinders
Request a Quote for Airtac SDAD Double Rod Slim Cylinder SDAD32X75SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.