Airtac SDAD Double Rod Slim Cylinder SDAD32X80SB
The AirTAC Airtac SDAD Double Rod Slim Cylinder SDAD32X80SB is a genuine double-acting COMPACT cylinder with a piston rod out BOTH ends (Ø32mm bore, 80mm stroke). The through-rod resists twisting and lets you drive a tool on one end while a switch or dog reads position on the other — with identical force in both directions.
- BoreØ32 mm
- Stroke80 mm
- Port sizePT1/8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAD Double Rod Slim Cylinder SDAD32X80SB
The AirTAC SDAD32X80SB is a double-acting, double-rod compact cylinder featuring an 80 mm stroke and a 32 mm bore. Because the piston rod exits both ends, the annular area is identical in each chamber, yielding an equal push and pull force of 345.6 N at 0.5 MPa. This symmetric output is ideal for driving loads that require consistent momentum in both directions.
The through-rod geometry inherently resists twisting, providing stable anti-rotation characteristics. Its short riveted body minimizes axial mounting depth, fitting where larger profile cylinders cannot. Equipped with a built-in magnet, it supports reed or electronic switches, while the male M10x1.25 rod threads on both ends offer direct tool mounting.
Airtac SDAD Double Rod Slim Cylinder SDAD32X80SB Technical Specifications
| Model | Airtac SDAD Double Rod Slim Cylinder SDAD32X80SB |
|---|---|
| Series | SDAD compact double-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, rod both ends |
| Port size | PT1/8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Because a rod occupies both cylinder chambers, the effective area — and therefore the force — is identical in both directions. Specifications follow the official AirTAC SDAD datasheet.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Force uses the annular (rod-side) area on both strokes, so extend and retract match. Actual usable force is lower than theoretical due to friction. Size with a safety margin.
Model Code: Airtac SDAD Double Rod Slim Cylinder SDAD32X80SB
| SDAD | Compact double-acting cylinder, rod out both ends. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rods (omit = female thread). |
Thread: PT standard. Related SDA-family variants: SDA (single rod), SSA/STA (single acting), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAD Double Rod Slim Cylinder SDAD32X80SB Is Used
Symmetric Transfer Arms
Drives pick-and-place arms where the 345.6 N equal force ensures smooth acceleration and deceleration of parts during both extension and retraction strokes.
Anti-Rotation Guiding
The dual-exit through-rod resists twisting moments, keeping precision gauging fixtures perfectly aligned without needing external linear bearings.
Dual-End Tooling
Mounts a forming head on the male M10x1.25 thread at one end while a magnetic dog triggers a reed or electronic switch on the opposite end for synchronized processing.
Is the Airtac SDAD Double Rod Slim Cylinder SDAD32X80SB the Right Cylinder?
When sizing this 32 mm bore unit, compare its 345.6 N output at 0.5 MPa against adjacent bores. Stepping down, the SDAD25 provides 206.2 N, whereas stepping up to the SDAD40 yields 527.8 N. This positions the SDAD32X80SB perfectly for medium-duty tasks, offering a safe working load of roughly 207 N and a vertical lift capacity of approximately 17.6 kg with a 2:1 safety margin.
The through-rod design allows you to mount a work tool on one end and a position dog on the opposite end simultaneously. Note that the fixed NBR bumper decelerates the stroke end but is not an adjustable air cushion. Furthermore, this cylinder will not hold a load if air pressure drops; use an external rod lock or pilot-operated check valve for secure load holding. This specific configuration includes the -S magnet for sensing and -B male M10x1.25 rod threads at both ends, operating via a PT1/8 port.
Quick checklist
- ✓ Need equal force both directions?
- ✓ Anti-rotation / dual-end mounting?
- ✓ Space for a rod that exits both ends
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rod exiting both ends.
- check Avoid side load on either rod end.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAD Double Rod Slim Cylinder SDAD32X80SB FAQ
The double-rod design provides equal force in both directions: 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a theoretical maximum of 70 kgf at 1.0 MPa.
Yes, the through-rod extends from both sides, allowing you to drive a tool on one end while using the other for a switch dog. This specific -B variant features male M10x1.25 threads on both rod ends for direct mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAD Cylinders
Request a Quote for Airtac SDAD Double Rod Slim Cylinder SDAD32X80SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.