Airtac SDAD Double Rod Slim Cylinder SDAD80X10B
The AirTAC Airtac SDAD Double Rod Slim Cylinder SDAD80X10B is a genuine double-acting COMPACT cylinder with a piston rod out BOTH ends (Ø80mm bore, 10mm stroke). The through-rod resists twisting and lets you drive a tool on one end while a switch or dog reads position on the other — with identical force in both directions.
- BoreØ80 mm
- Stroke10 mm
- Port sizePT3/8
- Acting typeDouble acting, double rod
- Rod threadM14×1.5 (F) / M22×1.5 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAD Double Rod Slim Cylinder SDAD80X10B
The AirTAC SDAD80X10B is a double-acting compact cylinder featuring a through-rod that exits both ends of the riveted body. Because the rod occupies both chambers, the annular area is identical in each direction, giving you exactly 2267.8 N of push and pull force at 0.5 MPa. This symmetry is essential when driving heavy platens that must move without shifting their center of mass.
This specific SKU uses a 25 mm piston rod with male M22x1.5 threads on both ends, allowing direct mounting of heavy tooling. The short 10 mm stroke keeps the overall footprint remarkably shallow for an 80 mm bore, saving axial depth where space is tight. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion.
Airtac SDAD Double Rod Slim Cylinder SDAD80X10B Technical Specifications
| Model | Airtac SDAD Double Rod Slim Cylinder SDAD80X10B |
|---|---|
| Series | SDAD compact double-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting, rod both ends |
| Port size | PT3/8 |
| Rod end thread | M14×1.5 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Because a rod occupies both cylinder chambers, the effective area — and therefore the force — is identical in both directions. Specifications follow the official AirTAC SDAD datasheet.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
Force uses the annular (rod-side) area on both strokes, so extend and retract match. Actual usable force is lower than theoretical due to friction. Size with a safety margin.
Model Code: Airtac SDAD Double Rod Slim Cylinder SDAD80X10B
| SDAD | Compact double-acting cylinder, rod out both ends. |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rods (omit = female thread). |
Thread: PT standard. Related SDA-family variants: SDA (single rod), SSA/STA (single acting), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAD Double Rod Slim Cylinder SDAD80X10B Is Used
Heavy-Duty Stamping Platen
Drives a 100 kg stamping platen with equal 2267.8 N force in both directions, ensuring the tool returns smoothly without gravitational lag.
Symmetric Clamping Jig
Uses the male M22x1.5 threaded rods on both ends to clamp a heavy workpiece from opposite sides simultaneously, resisting rotational twist.
Short-Stroke Lifter
Lifts components vertically in a tight 10 mm range where axial depth is restricted, relying on the compact riveted body to fit shallow frames.
Is the Airtac SDAD Double Rod Slim Cylinder SDAD80X10B the Right Cylinder?
When sizing this 80 mm bore unit, consider the SDAD63 which yields 1401.5 N at 0.5 MPa, or step up to the massive SDAD100 providing 3524.9 N at 0.5 MPa. This model sits comfortably in the middle, offering a safe working load around 1361 N (60 percent of its 0.5 MPa rating) and a vertical lift capacity of roughly 115.6 kg with a 2:1 safety margin.
The through-rod geometry prevents twisting during high-load operations, and you can mount a tool on one end while using the opposite side for a secondary action. Because this SKU lacks the -S magnet, it cannot accept reed or electronic switches. Note that a standard cylinder drifts when air is lost; for load holding, install an external rod lock or pilot-operated check valve. Ensure your plumbing matches the PT3/8 port.
Quick checklist
- ✓ Need equal force both directions?
- ✓ Anti-rotation / dual-end mounting?
- ✓ Space for a rod that exits both ends
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rod exiting both ends.
- check Avoid side load on either rod end.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAD Double Rod Slim Cylinder SDAD80X10B FAQ
The push and pull forces are identical because the rod exits both ends. It generates 2267.8 N at 0.5 MPa, 3175 N at 0.7 MPa, and a theoretical maximum of 463 kgf at 1.0 MPa. The maximum operating pressure is 1.0 MPa.
No, this specific SKU does not include a piston magnet, so it cannot accept reed or electronic switches. You would need the -S variant for sensing. However, the dual male M22x1.5 rod ends still allow you to mount external dogs or mechanical stops on either side.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAD Cylinders
Request a Quote for Airtac SDAD Double Rod Slim Cylinder SDAD80X10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.