Airtac SED Double Rod Cylinder SED100X110S
The AirTAC Airtac SED Double Rod Cylinder SED100X110S is a genuine double-acting ISO 15552 double-rod cylinder: a Ø25mm piston rod exits BOTH ends of the Ø100mm bore, giving equal force and speed in both directions and letting you mount tooling or a sensor flag on the back rod. Stroke 110mm, PT1/2 ports, adjustable cushioning.
- BoreØ100 mm
- Stroke110 mm
- Port sizePT1/2
- ConfigurationDouble rod
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SED Double Rod Cylinder SED100X110S
The AirTAC SED100X110S is a double-acting, double-rod profile cylinder built to ISO 15552 dimensional standards. A Ø25 mm rod exits both end covers, yielding identical annulus areas. This means drive force is perfectly symmetrical: 3681 N each way at 0.5 MPa. The extruded aluminum barrel has no external tie rods, ensuring a clean profile.
Fitted with the -S magnet option, this unit supports DMSE electronic and CMSE reed sensors for end-of-stroke detection. Field-adjustable air cushions at both ends absorb kinetic energy near stroke end. The rear rod extension can mount a cam or secondary tool, actively resisting torsional load and preventing rotation.
Airtac SED Double Rod Cylinder SED100X110S Technical Specifications
| Model | Airtac SED Double Rod Cylinder SED100X110S |
|---|---|
| Series | SED ISO 15552 double-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SED datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
Because a rod exits both ends, the effective piston area — and therefore the force — is identical on extend and retract. Actual usable force is lower than theoretical; size with a safety margin.
Model Code: Airtac SED Double Rod Cylinder SED100X110S
| SED | ISO 15552 profile-barrel DOUBLE-ROD double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SED): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SE (single rod), SEJ (double-rod adjustable stroke), BSED (double-rod rod lock).
Where the Airtac SED Double Rod Cylinder SED100X110S Is Used
Servo Press Platen
Drives a 5153 N pressing platen where the rear rod simultaneously triggers a DMSE sensor, ensuring perfectly matched extend and retract speeds.
Pallet Diverter
Shifts heavy pallets on a packaging line using equal both-way force, with the twin rods absorbing high torsional side loads during diversion.
Multi-Head Drill Index
Indexes a drilling fixture with 3681 N at 0.5 MPa, using the protruding rear rod to mount a mechanical cam that sequences the next station.
Is the Airtac SED Double Rod Cylinder SED100X110S the Right Cylinder?
Choose this 100 mm bore when you need 5153 N of force at 0.7 MPa in both directions. If your application requires less force, the 80 mm bore provides 2268 N at 0.5 MPa. If you need more, the 125 mm bore offers 5734 N at 0.5 MPa. The twin-rod design provides superior anti-rotation stability compared to a single-rod SE cylinder.
This cylinder includes a magnet for position sensing. Remember that adjustable air cushions only decelerate the piston near stroke end; they do not hold position on air loss. For fail-safe holding, use an external rod lock or a BSED double-rod lock cylinder. When replacing an ISO 15552 unit, match the 110 mm stroke, PT1/2 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
- ✓ Equal force/speed both directions needed?
- ✓ Back-rod space for tooling or a flag
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Support both rod ends; avoid side load.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SED Double Rod Cylinder SED100X110S FAQ
Because the double-rod design creates equal piston areas on both sides, output force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
The twin rods prevent load rotation and allow the rear rod to drive a secondary mechanism or sensor flag. It also drops into any standard ISO 15552 footprint using Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounts.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SED Cylinders
Request a Quote for Airtac SED Double Rod Cylinder SED100X110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.