Airtac SED Double Rod Cylinder SED100X95
The AirTAC Airtac SED Double Rod Cylinder SED100X95 is a genuine double-acting ISO 15552 double-rod cylinder: a Ø25mm piston rod exits BOTH ends of the Ø100mm bore, giving equal force and speed in both directions and letting you mount tooling or a sensor flag on the back rod. Stroke 95mm, PT1/2 ports, adjustable cushioning.
- BoreØ100 mm
- Stroke95 mm
- Port sizePT1/2
- ConfigurationDouble rod
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SED Double Rod Cylinder SED100X95
The AirTAC SED100X95 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm bore and 95mm stroke. A rod extends from both end covers, yielding identical annulus areas. This means you get exactly 3681 N of output force in both extend and retract directions at 0.5 MPa.
This unit uses a 25mm rod with an M20x1.5 thread and a PT1/2 port. It includes adjustable air cushioning at both ends to manage kinetic energy near stroke limits. Note this SKU lacks a piston magnet, so it does not support CMSE or DMSE position sensing without modification.
Airtac SED Double Rod Cylinder SED100X95 Technical Specifications
| Model | Airtac SED Double Rod Cylinder SED100X95 |
|---|---|
| Series | SED ISO 15552 double-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 95 mm |
| Configuration | Double rod, double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SED datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
Because a rod exits both ends, the effective piston area — and therefore the force — is identical on extend and retract. Actual usable force is lower than theoretical; size with a safety margin.
Model Code: Airtac SED Double Rod Cylinder SED100X95
| SED | ISO 15552 profile-barrel DOUBLE-ROD double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SED): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SE (single rod), SEJ (double-rod adjustable stroke), BSED (double-rod rod lock).
Where the Airtac SED Double Rod Cylinder SED100X95 Is Used
Servo Press Platen
Drives a CNC press platen requiring 5153 N of equal force at 0.7 MPa. The twin rods prevent platen twisting under off-center loads.
Pallet Diverting Arm
Actuates a heavy diverter arm on a packaging conveyor. The rear rod end mounts a physical cam to trigger mechanical limit switches.
Injection Mold Ejector
Ejects dense plastic molds with 751 kgf max force. The dual-side guidance keeps the ejector plate perfectly parallel during retraction.
Is the Airtac SED Double Rod Cylinder SED100X95 the Right Cylinder?
Select this 100mm bore when you need substantial bidirectional power, yielding 3681 N both ways at 0.5 MPa. If your application requires less force, step down to the 80mm bore providing 2268 N. For heavier demands, the 125mm bore offers 5734 N. The twin-rod design provides superior anti-rotation stability compared to a single-rod SE cylinder, making it ideal for guiding heavy loads.
This model is dimensionally interchangeable per ISO 15552, serving as a direct drop-in replacement for other ISO 15552 double-rod profile cylinders. Match your bore, stroke, PT1/2 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Remember that a plain SED does not hold position on air loss; the piston will drift. For fail-safe holding, consider a BSED double-rod rod lock cylinder or an external locking mechanism.
Quick checklist
- ✓ Equal force/speed both directions needed?
- ✓ Back-rod space for tooling or a flag
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Support both rod ends; avoid side load.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SED Double Rod Cylinder SED100X95 FAQ
Because the double-rod design creates equal piston areas on both sides, output force is identical in both directions: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and a maximum of 751 kgf at 1.0 MPa.
The twin-rod configuration ensures equal extend and retract forces, provides better load guidance against rotation, and allows the rear rod end to drive a secondary mechanism or cam while maintaining a true ISO 15552 mounting footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SED Cylinders
Request a Quote for Airtac SED Double Rod Cylinder SED100X95
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.