Airtac SED Double Rod Cylinder SED32X5S
The AirTAC Airtac SED Double Rod Cylinder SED32X5S is a genuine double-acting ISO 15552 double-rod cylinder: a Ø12mm piston rod exits BOTH ends of the Ø32mm bore, giving equal force and speed in both directions and letting you mount tooling or a sensor flag on the back rod. Stroke 5mm, PT1/8 ports, adjustable cushioning.
- BoreØ32 mm
- Stroke5 mm
- Port sizePT1/8
- ConfigurationDouble rod
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SED Double Rod Cylinder SED32X5S
The AirTAC SED32X5S is a double-acting, double-rod ISO 15552 profile cylinder with a 32mm bore and 5mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding an equal force of 345N each way at 0.5MPa. The extruded aluminum barrel contains no external tie rods, ensuring a true ISO 15552 drop-in match.
Fitted with a standard magnet (-S), this unit supports CMSE reed and DMSE electronic sensors for end-of-travel signaling. The twin rods enhance load guidance against rotation, while the rear rod end can drive a secondary mechanism or cam. It features field-adjustable air cushioning at both ends and a PT1/8 port.
Airtac SED Double Rod Cylinder SED32X5S Technical Specifications
| Model | Airtac SED Double Rod Cylinder SED32X5S |
|---|---|
| Series | SED ISO 15552 double-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 5 mm |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SED datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Because a rod exits both ends, the effective piston area — and therefore the force — is identical on extend and retract. Actual usable force is lower than theoretical; size with a safety margin.
Model Code: Airtac SED Double Rod Cylinder SED32X5S
| SED | ISO 15552 profile-barrel DOUBLE-ROD double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SED): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SE (single rod), SEJ (double-rod adjustable stroke), BSED (double-rod rod lock).
Where the Airtac SED Double Rod Cylinder SED32X5S Is Used
PCB Edge Clamping
Uses the 345N both-way force to grip electronic boards during routing, with the twin rods preventing torsional load twist.
Film Web Tracking
Guides packaging film via a rear-rod cam, ensuring equal push and pull speed for precise tension control.
Lab Dispenser Actuation
Drives a micro-valve with a 5mm stroke, using DMSE electronic sensors on the -S magnet for repeatable dispensing.
Is the Airtac SED Double Rod Cylinder SED32X5S the Right Cylinder?
Selecting the 32mm bore provides 345N of force both ways at 0.5MPa, with a maximum of 70kgf at 1.0MPa. If your application requires less force, there is no smaller SED bore, but stepping up to the 40mm bore yields 528N at 0.5MPa. The 5mm stroke is ideal for micro-clamping or short ejection tasks where twin rods prevent load twisting. A plain SED does not hold position on air loss; for fail-safe holding, use a BSED double-rod rod lock. Match your ISO 15552 replacement by verifying the 32mm bore, 5mm stroke, PT1/8 port, and -S magnet option.
Quick checklist
- ✓ Equal force/speed both directions needed?
- ✓ Back-rod space for tooling or a flag
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Support both rod ends; avoid side load.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SED Double Rod Cylinder SED32X5S FAQ
The SED32X5S provides equal force in both directions due to its double-rod design. It delivers 345N at 0.5MPa, 483N at 0.7MPa, and a maximum of 70kgf at 1.0MPa.
The twin rods on the SED32X5S provide better anti-rotation guidance for the load and allow the rear rod end to mount a sensor flag or drive a secondary mechanism, while maintaining identical extend and retract speeds.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SED Cylinders
Request a Quote for Airtac SED Double Rod Cylinder SED32X5S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.