Airtac SGCD Dual Rod Cylinder SGCD200X100
The AirTAC Airtac SGCD Dual Rod Cylinder SGCD200X100 is a genuine double acting, double rod ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 100mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke100 mm
- Port sizeG3/4
- Acting typeDouble acting, double rod
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGCD Dual Rod Cylinder SGCD200X100
Delivering 15079 N of thrust in both directions at 0.5 MPa, this AirTAC double-rod ISO 15552 tie-rod cylinder eliminates the area differential found in single-rod units. The twin-rod architecture provides a symmetric load path and excellent anti-twist guidance, while a rod extending from each cover can drive dual stations or carry a rear sensor cam. Its four steel tie rods clamp the aluminum barrel securely to the covers, and the G3/4 port handles high flow volumes.
This 200 mm bore generates 21110 N at 0.7 MPa with a theoretical ceiling of 3075 kgf at 1.0 MPa. Based on the 0.5 MPa baseline, it handles a safe working load of roughly 9047 N, which translates to lifting about 769 kg vertically with a 2:1 safety margin. The standard TPU seals operate from -20 to +70 C, though a Viton H option extends heat resistance up to 150 C.
Airtac SGCD Dual Rod Cylinder SGCD200X100 Technical Specifications
| Model | Airtac SGCD Dual Rod Cylinder SGCD200X100 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | 21111 N |
| Max (@1.0 MPa) | 3204 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac SGCD Dual Rod Cylinder SGCD200X100
| SGCD | ISO 15552 tie-rod cylinder (double-rod type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCD Dual Rod Cylinder SGCD200X100 Is Used
Twin-Spindle Machining
Drives two opposing machining heads simultaneously using the equal force from both rod ends, ensuring perfectly synchronized material removal.
Balanced Lift Platform
Lifts heavy jigs vertically with a symmetric load path that prevents piston rod twisting, maintaining precise vertical alignment without side play.
Dual-End Transfer Pusher
Indexes parts on two separate conveyor lanes during a single stroke, using the rear rod extension to push a secondary fixture.
Is the Airtac SGCD Dual Rod Cylinder SGCD200X100 the Right Cylinder?
Sizing pneumatics requires checking both neighbors: stepping down to the 160 mm bore yields 9425 N at 0.5 MPa, while the massive 250 mm bore provides 23562 N. Choose this 200 mm unit when your mechanism needs equal push and pull forces, strict anti-rotation stability, or dual-tool actuation from one piston. It supports FA, LB, TC, FTC, TCM1, and TCM2 mounts via the ISO 15552 mounting interface. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors. For any stroke exceeding 500 mm, fit external guide rails to prevent rod binding under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCD Dual Rod Cylinder SGCD200X100 FAQ
Because the rod passes through both covers, force is equal in both directions: 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and a theoretical maximum of 3075 kgf at 1.0 MPa. The air port is G3/4.
No. The air cushions only decelerate the piston near the end of stroke; they do not hold load on air loss. Use an external rod lock or pilot-operated check valve for holding. Additionally, this specific SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG switches without upgrading to an -S variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCD Dual Rod Cylinder SGCD200X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.