Airtac SGCD Dual Rod Cylinder SGCD200X1000
The AirTAC Airtac SGCD Dual Rod Cylinder SGCD200X1000 is a genuine double acting, double rod ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 1000mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke1000 mm
- Port sizeG3/4
- Acting typeDouble acting, double rod
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
About the Airtac SGCD Dual Rod Cylinder SGCD200X1000
Delivering 15079 N of thrust in both directions at 0.5 MPa, this large-bore tie-rod cylinder uses a twin-rod piston to equalize output force. It yields a safe working load of about 9047 N, which translates to lifting roughly 769 kg vertically with a 2:1 safety margin. The G3/4 port feeds a robust four-steel-tie-rod build clamping the aluminum barrel.
Dimensionally interchangeable per the ISO 15552 mounting interface, it drops directly into existing large-bore fixtures. A rod exiting each cover provides a symmetric load path to prevent rotation and drive twin tooling simultaneously. This non-magnetic SKU lacks the -S option and cannot accept CMSG/DMSG/EMSG sensors. Standard TPU seals handle -20 to +70 C, while a Viton H upgrade extends heat resistance to 150 C.
Airtac SGCD Dual Rod Cylinder SGCD200X1000 Technical Specifications
| Model | Airtac SGCD Dual Rod Cylinder SGCD200X1000 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, double rod |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | 21111 N |
| Max (@1.0 MPa) | 3204 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac SGCD Dual Rod Cylinder SGCD200X1000
| SGCD | ISO 15552 tie-rod cylinder (double-rod type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCD Dual Rod Cylinder SGCD200X1000 Is Used
Twin-Press Tooling
Drives two forming tools simultaneously from opposite rod ends, ensuring perfectly synchronized pressing across a 1000 mm span.
Symmetric Diverting Gate
Uses the equal push and pull force to actuate a heavy diverter on a high-speed packaging line without twisting the gate.
Vertical Lift Platform
Raises and lowers a 769 kg materials platform with a 2:1 margin, relying on the twin rods for stable vertical guidance.
Is the Airtac SGCD Dual Rod Cylinder SGCD200X1000 the Right Cylinder?
When sizing this unit, the smaller 160 mm bore provides 9425 N each way, whereas the larger 250 mm bore offers 23562 N. Choose the 200 mm double-rod format when your mechanism demands anti-rotation guidance, twin tooling operation, or a symmetric load path. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2 brackets. Because this is a 1000 mm stroke, you must use external guide rails to prevent rod bending and absorb side loads. Remember that a plain cylinder drifts without live air; the adjustable 50 mm cushions only decelerate, so fit an external rod lock or pilot-operated check valve to hold loads securely.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCD Dual Rod Cylinder SGCD200X1000 FAQ
Because it is a double-rod cylinder, force is equal both ways using the rod-side area. It generates 15079 N at 0.5 MPa and 21110 N at 0.7 MPa, with a theoretical maximum of 3075 kgf at 1.0 MPa. The air port size is G3/4.
No, this specific SKU does not include a magnet and cannot accept CMSG, DMSG, or EMSG sensors. You must select the -S variant of the SGCD200X1000 to enable magnetic position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCD Dual Rod Cylinder SGCD200X1000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.