Airtac SGCD Dual Rod Cylinder SGCD200X160S
The AirTAC Airtac SGCD Dual Rod Cylinder SGCD200X160S is a genuine double acting, double rod ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 160mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke160 mm
- Port sizeG3/4
- Acting typeDouble acting, double rod
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
About the Airtac SGCD Dual Rod Cylinder SGCD200X160S
Delivering 15079 N of thrust in both directions at 0.5 MPa, this large-bore double-rod cylinder uses a single piston with a rod exiting both covers. The symmetric layout ensures force is equal both ways, making it good for about 9047 N of real work, roughly 769 kg lifted vertically. A G3/4 port supplies the air, while four steel tie rods clamp the aluminum barrel.
Because the piston rod passes through both ends, the unit provides inherent anti-twist guidance and can drive twin tooling or carry a sensor cam on the back face. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG switches. You also get genuine ISO 15552 mounting-interface interchangeability and adjustable 50 mm air cushions at each end.
Airtac SGCD Dual Rod Cylinder SGCD200X160S Technical Specifications
| Model | Airtac SGCD Dual Rod Cylinder SGCD200X160S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | 21111 N |
| Max (@1.0 MPa) | 3204 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac SGCD Dual Rod Cylinder SGCD200X160S
| SGCD | ISO 15552 tie-rod cylinder (double-rod type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCD Dual Rod Cylinder SGCD200X160S Is Used
Twin-Tool Transfer
Drives two synchronized workpieces from opposite rod ends to push and pull parts across a machining cell simultaneously.
Balanced Lift Station
Lifts heavy platens symmetrically using both rod ends, preventing torsional twist during vertical ascent and descent.
Dual-Cam Sensing
Uses the rear rod extension to trigger CMSG or DMSG magnetic switches for mid-stroke confirmation without external brackets.
Is the Airtac SGCD Dual Rod Cylinder SGCD200X160S the Right Cylinder?
This 200 mm bore sits between the 160 mm option (9425 N each way at 0.5 MPa) and the 250 mm model (23562 N). Choose the double-rod format when your mechanism demands anti-rotation stability, symmetric load paths, or back-end sensing. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2. The -S magnet enables position detection. For any stroke exceeding 500 mm, add external guide rails to prevent side-load wear on the seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCD Dual Rod Cylinder SGCD200X160S FAQ
It provides equal force in both directions: 15079 N at 0.5 MPa and 21110 N at 0.7 MPa, with a theoretical max of 3075 kgf at 1.0 MPa. The air port size is G3/4.
No, the air cushions only decelerate the piston near the stroke ends and do not act as a brake. To prevent drift on air loss, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCD Dual Rod Cylinder SGCD200X160S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.