Airtac SGCD Dual Rod Cylinder SGCD200X25
The AirTAC Airtac SGCD Dual Rod Cylinder SGCD200X25 is a genuine double acting, double rod ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 25mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke25 mm
- Port sizeG3/4
- Acting typeDouble acting, double rod
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGCD Dual Rod Cylinder SGCD200X25
Delivering 15079 N of equal force in both directions at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder uses a twin-rod architecture to balance the load path perfectly. The four steel tie rods clamp the aluminum barrel securely, and the G3/4 air port feeds the 40 mm piston rod exiting each cover. Because both faces use the identical rod-side area, push and pull outputs match exactly.
This symmetric design yields a safe working load of roughly 9047 N, capable of vertically lifting about 769 kg with a 2:1 safety margin. The standard TPU seals handle -20 to +70 C, while a Viton H option extends heat resistance up to 150 C. Note that this specific SKU lacks the -S magnet, so it cannot accept CMSG or DMSG sensors.
Airtac SGCD Dual Rod Cylinder SGCD200X25 Technical Specifications
| Model | Airtac SGCD Dual Rod Cylinder SGCD200X25 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | 21111 N |
| Max (@1.0 MPa) | 3204 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac SGCD Dual Rod Cylinder SGCD200X25
| SGCD | ISO 15552 tie-rod cylinder (double-rod type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCD Dual Rod Cylinder SGCD200X25 Is Used
Twin-Spindle Pressing
Drives two opposing forming tools with equal 15079 N force, keeping the press ram perfectly parallel during heavy stamping operations.
Symmetric Diverting Gate
Uses the extended rear rod as a mechanical cam to trigger a pneumatic valve, synchronizing the diverting arm position on a packaging line.
Balanced Vertical Lift
Lifts approximately 769 kg of raw material in a vertical transfer chute without the rod binding, thanks to the equal pull-side area on both strokes.
Is the Airtac SGCD Dual Rod Cylinder SGCD200X25 the Right Cylinder?
Sizing this 200 mm bore against its neighbors shows a clear step: the 160 mm version provides 9425 N, whereas the 250 mm jumps to 23562 N at 0.5 MPa. Choose the double-rod format when your mechanism demands anti-rotation stability, needs to drive two tools simultaneously, or requires a rear-end sensor cam. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2 brackets. For any stroke at or above 500 mm, always use external guide rails to prevent side-load wear on the seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCD Dual Rod Cylinder SGCD200X25 FAQ
Because it is a double-rod cylinder, force is equal both ways using the rod-side area. It generates 15079 N at 0.5 MPa and 21110 N at 0.7 MPa, with a theoretical maximum of 3075 kgf at 1.0 MPa. The air port is G3/4.
No, the air cushion only decelerates the piston near the stroke ends and does not lock the load; you need an external rod lock or pilot-operated check valve for holding. Also, this SKU lacks the -S magnet, so it cannot mount CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCD Dual Rod Cylinder SGCD200X25
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.