Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-10
The AirTAC Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-10 is a genuine double acting, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 160mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke160 mm
- Port sizeG3/4
- Acting typeDouble acting, adjustable stroke
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-10
Delivering 10053 N of push force at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder uses four steel rods to clamp its aluminum barrel for high structural rigidity. The G3/4 port feeds a double-acting single-rod mechanism that drives a 40 mm piston rod, making it dimensionally interchangeable per the ISO 15552 mounting interface for existing large-bore fixtures.
The external adjuster allows you to shorten the extend stroke on-site by up to 10 mm, giving a usable range of 150 to 160 mm without changing the cylinder itself. This on-site fine-tuning is ideal for dialing in exact end positions, while the two-way piston seal and adjustable 50 mm air cushions manage impact. It handles about 6032 N of safe working load, which means you can lift roughly 512 kg vertically with a 2:1 margin. Note this SKU lacks a magnet, so it cannot take CMSG/DMSG/EMSG sensors without the -S option.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-10 Technical Specifications
| Model | Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-10 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-10
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-10 Is Used
Press End-Position Tuning
Dial in the exact bottom dead center of a light-duty stamping or riveting press on-site using the 10 mm extend shortening window, avoiding mechanical shim changes.
Divertor Stroke Adjustment
Fine-tune the actuation length of a heavy package divertor arm by up to 10 mm to accommodate different box sizes without swapping the cylinder.
Pallet Stop Calibration
Calibrate the stopping point on a heavy pallet handling line by adjusting the extend stroke from 150 to 160 mm to compensate for mechanical wear over time.
Is the Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-10 the Right Cylinder?
When sizing this 160 mm bore, stepping down to a 125 mm unit drops the 0.5 MPa push force to 6136 N, while stepping up to a 200 mm bore raises it to 15708 N. The 10 mm adjustable window is highly useful when you need to share a spare cylinder across slightly different stroke variants or fine-tune a machine's end position on the factory floor. SGCJ mounting options include FA, LB, TC, FTC, TCM1, and TCM2. Because this is a no-S SKU, it cannot accept magnetic sensors. For any stroke length approaching or exceeding 500 mm, always use a dedicated guide rail to prevent side-load damage to the rod and seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-10 FAQ
This 160 mm bore cylinder features a G3/4 air port and delivers 10053 N push and 9425 N pull at 0.5 MPa. At 0.7 MPa it provides 14074 N push and 13194 N pull. The theoretical maximum force is 2050 kgf at 1.0 MPa.
The nominal stroke is 160 mm, which is the maximum extend length. The external adjuster lets you shorten the extend stroke on-site by up to 10 mm, yielding a usable range of 150 to 160 mm. The retract end is fixed. This stop only sets the end position and does not hold the load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.