Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-100
The AirTAC Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-100 is a genuine double acting, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 160mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke160 mm
- Port sizeG3/4
- Acting typeDouble acting, adjustable stroke
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-100
Delivering 10053 N of push force at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder uses four steel rods to clamp its aluminum barrel for high rigidity. The G3/4 port and M36x2.0 rod thread handle serious airflows, while the two-way piston seal ensures reliable double-acting single-rod operation.
The external adjuster lets you shorten the extend stroke on-site by up to 100 mm, yielding a usable 60-160 mm window without changing the cylinder itself. This yields a safe working load of roughly 6032 N, or about 512 kg lifted vertically with a 2:1 margin. It is dimensionally interchangeable per the ISO 15552 mounting interface, and a Viton H seal can raise the operating ceiling to 150 C.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-100 Technical Specifications
| Model | Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-100 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-100
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-100 Is Used
Press Fit Tuning
Micro-adjust the 60-160 mm extend stop on-site to set precise insertion depths for bearing press fits without swapping cylinders.
Divertor Stroke Trim
Shorten the extend window up to 100 mm to fine-tune a conveyor divertor arm position for varying package widths.
Pallet Stop Calibration
Dial in the exact end position for a heavy pallet stop gate, using the external adjuster to compensate for mechanical wear.
Is the Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-100 the Right Cylinder?
Size this 160 mm bore against the 125 mm option (6136 N push at 0.5 MPa) or the larger 250 mm class (24543 N). The adjustable stroke is ideal when you need on-site end-position tuning or want a shared spare across stroke variants. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2. Because this SKU lacks the -S suffix, it cannot accept a magnetic sensor; add -S for CMSG/DMSG/EMSG switches. For any stroke over 500 mm, use a guide to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-100 FAQ
At 0.5 MPa it pushes 10053 N and pulls 9425 N. At 0.7 MPa it pushes 14074 N and pulls 13194 N. The theoretical max is 2050 kgf at 1.0 MPa. It uses a G3/4 port, a 40 mm rod, and a 50 mm adjustable air cushion at each end.
The nominal 160 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke on-site by up to 100 mm, giving a usable extend range of 60-160 mm. The retract end is fixed. This mechanism only sets the end position; it does not hold the load on air loss, so use an external rod lock for holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X160-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.