Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X350-75S
The AirTAC Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X350-75S is a genuine double acting, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 350mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke350 mm
- Port sizeG3/4
- Acting typeDouble acting, adjustable stroke
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X350-75S
Delivering 10053 N of push force at 0.5 MPa, this large-bore ISO 15552 tie-rod actuator handles heavy-duty positioning with ease. Four steel rods clamp the aluminum barrel, and the G3/4 port feeds the Ø40 mm rod. It yields a safe working load of roughly 6032 N, lifting about 512 kg vertically with a 2:1 margin.
The external adjuster lets you shorten the extend stroke on-site by up to 75 mm, giving a usable range of 275 to 350 mm without changing the cylinder. The retract end remains fixed. A built-in magnet supports CMSG/DMSG/EMSG sensors, and Viton H seals can raise the operating ceiling to 150 C.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X350-75S Technical Specifications
| Model | Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X350-75S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 350 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X350-75S
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X350-75S Is Used
Press Stroke Tuning
Fine-tune the extend end position on-site within the 75 mm window to set precise metal forming depth without swapping actuators.
Heavy Pallet Diverter
Diverts large pallets using the 10053 N push force, adjusting the reach up to 75 mm to accommodate varying line widths.
Vertical Lift Gate
Lifts heavy security gates, safely managing roughly 512 kg vertically with a 2:1 margin while stopping smoothly via the 50 mm cushion.
Is the Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X350-75S the Right Cylinder?
When sizing this unit, the 125 mm bore offers 6136 N push at 0.5 MPa, while the 200 mm bore jumps to 15708 N if you need more power. The adjustable stroke is ideal for sharing spares across stroke variants or fine-tuning the end position on-site. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2. The -S suffix confirms the magnet is present for electronic switches. For this 350 mm stroke, ensure external guide rails carry any side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X350-75S FAQ
It provides 10053 N push and 9425 N pull at 0.5 MPa, 14074 N push and 13194 N pull at 0.7 MPa, with a theoretical max of 2050 kgf at 1.0 MPa. The air port is G3/4.
An external stop screw shortens the extend stroke on-site by up to 75 mm, yielding a usable extend range of 275 to 350 mm. The nominal 350 mm is the maximum, and the retract end is fixed. This mechanism sets end position and is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X350-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.