Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X50-50
The AirTAC Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X50-50 is a genuine double acting, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø160mm bore and 50mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ160 mm
- Stroke50 mm
- Port sizeG3/4
- Acting typeDouble acting, adjustable stroke
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X50-50
Delivering 10053 N of push force at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder handles heavy pressing and clamping duties with ease. The four steel tie rods clamp the aluminum barrel to the covers for maximum structural rigidity, while the two-way piston seal ensures leak-free cycling. A practical safe working load sits around 6032 N, which translates to lifting roughly 512 kg vertically with a 2:1 safety margin.
This double-acting single-rod unit features a 50 mm extend stroke that can be shortened on-site by up to 50 mm via an external adjuster, letting you fine-tune the end position without swapping the cylinder. The retract end remains fixed. It uses a G3/4 port and a 50 mm adjustable air cushion at each end to decelerate the payload smoothly. For high-temperature environments up to 150 C, you can specify the Viton H seal option instead of the standard TPU.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X50-50 Technical Specifications
| Model | Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X50-50 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø160 mm |
| Stroke | 50 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X50-50
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 160 | Bore size in mm (125 / 160 / 200 / 250). |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X50-50 Is Used
Precision Stamping Press
Dial in the exact 0-50 mm extend contact point on-site to apply 10053 N of clamping force without over-traveling the die set.
Adjustable Stop Gate
Fine-tune the physical stop position for varying product widths on a conveyor line, using the external adjuster to shorten the stroke as needed.
Component Seating Fixture
Press bearings into housings using the 14074 N available at 0.7 MPa, tweaking the extend window to accommodate different bearing heights without changing tooling.
Is the Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X50-50 the Right Cylinder?
When sizing this 160 mm bore, stepping down to a 125 mm bore drops the 0.5 MPa push force to 6136 N, while stepping up to a 200 mm bore raises it to 15708 N. The adjustable stroke is ideal when you need to share a common spare across multiple stroke variants or dial in a precise end position on the machine. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2 brackets. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors; you would need the -S variant for position detection. Keep operating speed within 30-500 mm/s and use external guide rails to support side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X50-50 FAQ
This 160 mm bore cylinder uses a G3/4 port and generates 10053 N push and 9425 N pull at 0.5 MPa. At 0.7 MPa it delivers 14074 N push and 13194 N pull. The theoretical maximum force is 2050 kgf at 1.0 MPa.
The nominal 50 mm extend stroke is the maximum. The external adjuster lets you shorten the extend stroke on-site by up to 50 mm, giving a usable extend range of 0-50 mm. The retract end is fixed, and the adjuster sets the end position rather than holding the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCJ125~160 Adjustable Cylinder SGCJ160X50-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.