Airtac SSA Single-Acting Compact Cylinder SSA12X10
The AirTAC Airtac SSA Single-Acting Compact Cylinder SSA12X10 is a genuine single-acting COMPACT cylinder (single acting, push type) with a Ø12mm bore and 10mm stroke. Air pushes the rod and an internal spring returns it, so one solenoid line drives the motion — ideal for short-stroke clamping and ejection in tight spaces.
- BoreØ12 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeSingle acting, push type
- Rod threadM3×0.5 (F) / M5×0.8 (B)
- CushionFixed NBR bumper
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SSA Single-Acting Compact Cylinder SSA12X10
The AirTAC SSA12X10 is a compact single-acting push-type cylinder where air pressure extends the rod and an internal spring retracts it. It provides 46.5 N of net push at 0.5 MPa, meaning the return spring force is already subtracted from the raw air pressure. This 12 mm bore actuator uses a 6 mm rod and an M5x0.8 port.
Because it only needs one air line and one solenoid port to drive the motion, plumbing is drastically simplified compared to double-acting units. The short riveted body saves axial mounting depth in crowded fixtures. A fixed NBR bumper decelerates the stroke end, though it is not an adjustable air cushion.
Airtac SSA Single-Acting Compact Cylinder SSA12X10 Technical Specifications
| Model | Airtac SSA Single-Acting Compact Cylinder SSA12X10 |
|---|---|
| Series | SSA compact single-acting cylinder |
| Bore size | Ø12 mm |
| Stroke | 10 mm |
| Acting type | Single acting, push type |
| Port size | M5×0.8 |
| Rod end thread | M3×0.5 female / M5×0.8 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed NBR bumper |
| Max standard stroke | Up to 30 mm |
Specifications follow the official AirTAC SDA-family datasheet. Single-acting types start at 0.2 MPa (the spring must be overcome). Confirm against the product label before installation.
Net Output Force (Ø12mm, Push)
| Pressure | Push force (net) |
|---|---|
| 0.5 MPa | 47 N |
| 0.7 MPa | 69 N |
These are NET output forces — the return-spring force is already deducted. Single-acting push only; the spring performs the opposite stroke. Size with a safety margin.
Model Code: Airtac SSA Single-Acting Compact Cylinder SSA12X10
| SSA | Compact single acting, push type cylinder series. |
|---|---|
| 12 | Bore size in mm. |
| ×10 | Stroke length in mm (single-acting max 30 mm). |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard. SSA pushes out / spring returns; STA pulls in / spring extends. Related: SDA (double acting), SDAD (double rod), SDAJ (adjustable stroke).
Where the Airtac SSA Single-Acting Compact Cylinder SSA12X10 Is Used
Micro-Clamp Station
Provides 46.5 N of net push to secure small electronic components during soldering without crowding the board.
Small Part Diverter
Uses the 10 mm stroke to push lightweight plastic caps off a production line using a single solenoid port.
Carton Flap Tucker
Tucks minor flaps on compact boxes where axial mounting depth is restricted by adjacent guide rails.
Is the Airtac SSA Single-Acting Compact Cylinder SSA12X10 the Right Cylinder?
When sizing this actuator, the 46.5 N net push at 0.5 MPa supports a safe working load of roughly 28 N, or a vertical lift of about 2.4 kg with a 2:1 margin. If your application requires slightly more force, stepping up to the SSA16 yields 80.5 N at 0.5 MPa. There is no smaller bore in this series, making the 12 mm the baseline choice.
This model features a 10 mm stroke, well under the 30 mm maximum limit. It requires at least 0.2 MPa operating pressure to overcome the internal spring. Because this SKU lacks the S option, it has no piston magnet and cannot accept a switch. The rod end features a female M3x0.5 thread. Remember that on air loss the spring drives the rod back to rest, so it cannot hold a mid-stroke load.
Quick checklist
- ✓ Net push force at your working pressure
- ✓ Stroke ≤ 30 mm (single-acting limit)
- ✓ Single air line saves a valve/port
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Remember the spring performs the return stroke.
- check Avoid side load on the short piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SSA Single-Acting Compact Cylinder SSA12X10 FAQ
The net push force is 46.5 N at 0.5 MPa and 69.2 N at 0.7 MPa. These figures already account for the internal return spring resistance.
No, this specific SKU lacks the built-in magnet. You must select the SSA12X10S variant to use reed or electronic switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SSA Cylinders
Request a Quote for Airtac SSA Single-Acting Compact Cylinder SSA12X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.