Airtac SSA Single-Acting Compact Cylinder SSA16X10
The AirTAC Airtac SSA Single-Acting Compact Cylinder SSA16X10 is a genuine single-acting COMPACT cylinder (single acting, push type) with a Ø16mm bore and 10mm stroke. Air pushes the rod and an internal spring returns it, so one solenoid line drives the motion — ideal for short-stroke clamping and ejection in tight spaces.
- BoreØ16 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeSingle acting, push type
- Rod threadM3×0.5 (F) / M5×0.8 (B)
- CushionFixed NBR bumper
About the Airtac SSA Single-Acting Compact Cylinder SSA16X10
The AirTAC SSA16X10 is a compact single-acting push-type cylinder where air extends the rod and an internal spring retracts it. It generates 80.5 N of net push at 0.5 MPa, meaning the return spring force is already subtracted from the raw air pressure. This 16 mm bore unit requires only one air line and one solenoid port, cutting plumbing complexity in tight fixtures.
Its short riveted body minimizes axial mounting depth compared to standard round-body cylinders. The fixed NBR bumper absorbs end-of-stroke shock without adjustable cushioning. This specific SKU lacks a piston magnet, so it cannot support position sensing; adding the -S option enables reed or electronic switches.
Airtac SSA Single-Acting Compact Cylinder SSA16X10 Technical Specifications
| Model | Airtac SSA Single-Acting Compact Cylinder SSA16X10 |
|---|---|
| Series | SSA compact single-acting cylinder |
| Bore size | Ø16 mm |
| Stroke | 10 mm |
| Acting type | Single acting, push type |
| Port size | M5×0.8 |
| Rod end thread | M3×0.5 female / M5×0.8 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed NBR bumper |
| Max standard stroke | Up to 30 mm |
Specifications follow the official AirTAC SDA-family datasheet. Single-acting types start at 0.2 MPa (the spring must be overcome). Confirm against the product label before installation.
Net Output Force (Ø16mm, Push)
| Pressure | Push force (net) |
|---|---|
| 0.5 MPa | 81 N |
| 0.7 MPa | 121 N |
These are NET output forces — the return-spring force is already deducted. Single-acting push only; the spring performs the opposite stroke. Size with a safety margin.
Model Code: Airtac SSA Single-Acting Compact Cylinder SSA16X10
| SSA | Compact single acting, push type cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×10 | Stroke length in mm (single-acting max 30 mm). |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard. SSA pushes out / spring returns; STA pulls in / spring extends. Related: SDA (double acting), SDAD (double rod), SDAJ (adjustable stroke).
Where the Airtac SSA Single-Acting Compact Cylinder SSA16X10 Is Used
Small Part Ejection
Uses the 80.5 N net extension force to push lightweight machined components out of a fixture before the next cycle.
Package Diverting
Deploys a 10 mm stroke to nudge small cartons on a conveyor line, relying on the internal spring to retract the gate quickly.
PCB Clamping
Holds delicate circuit boards during assembly with a safe working load of 48 N, releasing instantly when air pressure drops.
Is the Airtac SSA Single-Acting Compact Cylinder SSA16X10 the Right Cylinder?
When sizing this model, verify if the 80.5 N net push at 0.5 MPa fits your load. Dropping to the SSA12 reduces output to 46.5 N, while stepping up to the SSA20 increases it to 134.1 N. A safe working load is roughly 48 N, or a 4.1 kg vertical lift with a 2:1 safety margin.
Confirm the 16 mm bore, 10 mm stroke, M5x0.8 port, and female M3x0.5 rod-end thread suit your mounting hardware. Remember the 30 mm maximum standard stroke ceiling. Because the spring drives retraction, the SSA16X10 will not hold a mid-stroke load on air loss; it returns to its retracted rest position. Operating pressure must be 0.2-1.0 MPa to overcome the spring.
Quick checklist
- ✓ Net push force at your working pressure
- ✓ Stroke ≤ 30 mm (single-acting limit)
- ✓ Single air line saves a valve/port
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Remember the spring performs the return stroke.
- check Avoid side load on the short piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SSA Single-Acting Compact Cylinder SSA16X10 FAQ
This cylinder provides a net push force of 80.5 N at 0.5 MPa and 120.7 N at 0.7 MPa. These values already account for the internal return spring resistance.
No, this specific SKU does not include a piston magnet. You must select the -S option variant to use AirTAC reed or electronic switches for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SSA Cylinders
Request a Quote for Airtac SSA Single-Acting Compact Cylinder SSA16X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.