Airtac TACED Guided Compact Cylinder TACED80X80S
The AirTAC Airtac TACED Guided Compact Cylinder TACED80X80S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke80 mm
- Port size1/4"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
About the Airtac TACED Guided Compact Cylinder TACED80X80S
A double acting, double-rod compact cylinder built to ISO 21287, the TACED80X80S pushes a 20 mm rod out of both covers, so the 80 mm bore delivers 2356.2 N at 0.5 MPa in each direction - the rod-side area is identical on both sides. Twin guide rods on the yoke stop the tooling rotating and carry side load, keeping a gripper or press plate square without an external guide. The -S code means the magnet is fitted, so CMSE / DMSE reed or solid-state switches can be clamped straight onto the body slots.
The hard-anodized aluminium body with a roller-burnished bore and an S45C hard-chrome plated rod shrugs off wear in high-cycle work, and a fixed TPU bumper at each end absorbs end-of-stroke shock. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into guarded weld cells and gantry clamps where a full-length body will not fit. Running 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s, it gives roughly 1414 N of usable work at 0.5 MPa and lifts about 120 kg vertically with a 2:1 margin.
Airtac TACED Guided Compact Cylinder TACED80X80S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED80X80S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED80X80S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED80X80S Is Used
Weld-cell fixture clamping
The 2356.2 N per side at 0.5 MPa clamps steel stampings in automotive weld fixtures, and the twin guide yoke keeps the clamp pad square to the part without extra guiding.
Pallet lift-and-lower stations
With about 120 kg of vertical lift at a 2:1 margin, the through-rod raises and lowers conveyor pallet stops with equal force up and down - no spring return to fight.
Monitored press-fit stations
The fitted -S magnet drives CMSE / DMSE switches at both ends of the 80 mm stroke, confirming part presence on an electronics assembly press head.
Is the Airtac TACED Guided Compact Cylinder TACED80X80S the Right Cylinder?
At 2356.2 N per side (3298.7 N at 0.7 MPa, up to 480.5 kgf at 1.0 MPa), the 80 mm bore suits heavy clamping and lift-assist duty. Step down to the 63 mm bore (1458.1 N at 0.5 MPa) for lighter fixtures, or up to the 100 mm bore (3769.9 N) when the part mass demands more. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a held load matters. FB flange mounting and the fitted -S magnet for CMSE / DMSE switches make this a clean drop-in for monitored stations; 1/4" ports, female M12x1.75 rod thread, PT port thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED80X80S FAQ
Because a rod exits both covers, the 80 mm bore works on the rod-side area in both directions: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, equal push and pull. At the full 1.0 MPa rating it reaches 480.5 kgf. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight guards and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy; it is not adjustable and never holds a load when air is lost. Mounting is FB flange, the rod end is female M12x1.75, and the -S magnet on this model accepts CMSE / DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED80X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.