Airtac ESV Solenoid Valve ESV630CEI
2. Connection interface mounting dimensions comply with ISO 5599-1 international standard;
3. Equipped with custom-engineered sealing components for enhanced flow capacity and extended service life;
4. Series 200/300/400 enable seamless conversion between internal pilot-operated, external pilot-operated, and pneumatically controlled configurations by adjusting the orientation of sealing components;
5. Base-mounted valve body design with options for single-unit or modular multi-unit bases, allowing flexible assembly into any required number of connected units;
6. Versatile base configurations with multiple air supply connections and mounting options for optimized usability;
7. Integrated exhaust throttling in Series 200/300/400 bases eliminates the need for external throttle valves.
Category: Solenoid Valves, Brand: AIRTAC, Series: ESV
AirTAC ESV630CEI Solenoid Valve Technical Specifications
- Model: ESV630CEI (Coil Excluded)
- Valve type: 5/2-way, double solenoid operated
- Port configuration: G3/8" (BSPP thread standard)
- Operating pressure range: 0.15–1.0 MPa (21.7–145 PSI)
- Voltage variants: DC12V (±10%), DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
- Flow capacity: 750 L/min (Cv=1.5 at 0.5MPa)
- Response time: ≤30ms (energize), ≤50ms (de-energize)
- Seal material: Heat-resistant NBR (Nitrile) - standard / Optional FKM (Viton)
- Ambient temperature: -5℃ to 80℃ (with NBR seals)
- Duty cycle: 100% continuous operation capable
- Protection class: IP67 (coil connector meets NEMA 4X when properly sealed)
- Weight: 580g ±3% (valve body only, excludes coil and accessories)
- Dimensions: 82mm(L) × 56mm(W) × 98mm(H) (manual override protrusion adds 18mm)
High-flow proportional control valve engineered for industrial automation systems requiring precise directional control. Features anodized aluminum body with brass core components for corrosion resistance in humid environments. The ESV630CEI's low-hysteresis design ensures repeatable switching accuracy (±2% response consistency) even under variable load conditions.
- Pneumatic pressurization systems in die casting machines
- Material handling robotics (end effector control)
- Plastic injection molding machine clamp controls
- Automotive assembly line tooling actuators
- Semiconductor wafer handling vacuum/pressure systems
Installation requirements:
Maintain 50mm clearance below valve for service access. Use M5 mounting screws with 0.6-0.8Nm torque.
Requires 5μm filtration (40μm for emergency bypass mode). Lubricated air (ISO VG32) extends service intervals to 50 million cycles.
| Property | Property Value |
|---|---|
| sku | ESV630CEI |
| Standard Voltage | AC 110V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.