Airtac ACED Double-acting Compact Cylinder ACED63X250SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X250SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 250mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke250 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X250SB
A double acting AirTAC compact cylinder built to ISO 21287, the ACED63X250SB pushes a 16 mm rod out of BOTH covers, so thrust is identical on each stroke: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa. The through-rod resists rotation and light side load and gives a symmetric mount, and the rear rod can carry a sensor flag.
The hard-anodized aluminium body with S45C hard-chrome-plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, from -20 to +70 C. This model carries the optional -S magnet, so CMSE / DMSE switches can be clamped into the body slots, and the B code gives a male rod thread. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke shock.
Airtac ACED Double-acting Compact Cylinder ACED63X250SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X250SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 250 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X250SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X250SB Is Used
Reciprocating conveyor pushers
The through-rod drives a pusher bar from either side at equal 1458.1 N thrust, cycling packaging cartons at up to 500 mm/s without rod-rotation skew.
Position-monitored clamping fixtures
With the fitted -S magnet, CMSE or DMSE switches confirm open and closed rod positions on welding or assembly jigs where the rear rod carries a second flag.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X250SB the Right Cylinder?
Size both ways: if 1458.1 N at 0.5 MPa is more than the job needs, the ACED50 series gives 881.2 N at the same pressure; if the load demands more, step up to the ACED80 series at 2356.2 N. Note that a plain double-rod cylinder drifts when air is lost - for a held vertical load add a rod lock or pilot check valve. Match the mounting to the fixture: FA/FB flange, LB foot or FTC brackets bolt to the ISO 21287 face, with I and Y rod knuckles on the male-threaded rod ends.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X250SB FAQ
Yes - because a 16 mm rod exits both covers, both strokes use the rod-side area. Output is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa in either direction, with a peak of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight gantries and guards. A fixed TPU bumper at each end absorbs end-of-stroke energy but does not hold a load - use a rod lock or pilot check for that. FA/FB flange, LB foot and FTC brackets mount directly, and this model carries the optional -S magnet so CMSE / DMSE switches can be fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X250SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.