Airtac ACED Double-acting Compact Cylinder ACED63X50SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED63X50SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø63mm bore and 50mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ63 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED63X50SB
The ACED63X50SB is a double acting, double-rod compact cylinder built to the ISO 21287 short-body format. A 16 mm rod exits both covers, so the 63 mm bore delivers an identical 1458.1 N at 0.5 MPa (2041.3 N at 0.7 MPa) in each direction - both strokes work on the rod-side area. The male rod thread (B code) suits external rod accessories, and the fitted -S magnet lets you add CMSE or DMSE switches for end-position sensing. The hard-anodized aluminium body with an S45C hard-chrome-plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), from 30 to 500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 50 mm-stroke unit slots into tight gantries, guarding and fixture plates. Fixed TPU bumpers at both ends absorb end-of-stroke shock, and FA/FB flange or LB foot brackets bolt straight to the standard face.
Airtac ACED Double-acting Compact Cylinder ACED63X50SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED63X50SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED63X50SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED63X50SB Is Used
Reciprocating weld fixture
The through-rod drives a weldment carriage forward and back with equal 1458.1 N force, while the rear rod carries a sensor flag for stroke feedback at the fixture.
Press-fit ejection unit
After a compact press forms a bushing, the 63 mm bore ejects the part with 2041.3 N at 0.7 MPa in either stroke direction inside a tight die set.
Is the Airtac ACED Double-acting Compact Cylinder ACED63X50SB the Right Cylinder?
Size up or down from here: the 50 mm bore pushes 881.2 N at 0.5 MPa, while the 80 mm bore reaches 2356.2 N - pick 80 if your part weight or clamp force sits above about 90 kg equivalent. Remember this is a plain double-rod cylinder: if the load must stay put when air is lost, plan a rod lock or pilot check valve in the circuit. With the -S magnet already fitted, CMSE / DMSE switches mount directly in the body slots; FA/FB flanges, LB feet and I/Y rod knuckles complete the install.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED63X50SB FAQ
Yes - the double-rod design puts a 16 mm rod through both covers, so every stroke uses the rod-side area. At 0.5 MPa you get 1458.1 N, at 0.7 MPa you get 2041.3 N, and the maximum at 1.0 MPa is 297.4 kgf, identical push and pull. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow fixtures and guarded cells. This ACED63X50SB carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches click into the body slots for position signals. A fixed TPU bumper at each end absorbs end-of-stroke energy, and FA/FB flange or LB foot brackets mount on the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED63X50SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.