Airtac ACED Double-acting Compact Cylinder ACED80X175B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X175B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X175B
A double acting, double-rod compact cylinder built to ISO 21287, the ACED80X175B pushes a 20 mm rod out of BOTH covers, so its 80 mm bore delivers the same 2356.2 N at 0.5 MPa (3298.7 N at 0.7 MPa) on every stroke - no push versus pull difference. The male rod thread (B code) on each end bolts straight to tooling, and the through-rod resists rotation and side load while the free back-end rod can carry a sensor flag or a counter fixture. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi), with a fixed TPU bumper at each end absorbing end-of-stroke shock.
The hard-anodized aluminium body with a roller-burnished bore and an S45C hard-chrome-plated rod keeps wear low in daily production. Because the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, this 175 mm stroke unit fits where a full-length 80 mm bore cylinder would not. Note that no magnet is fitted: order the -S code if you need CMSE / DMSE switch detection.
Airtac ACED Double-acting Compact Cylinder ACED80X175B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X175B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X175B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X175B Is Used
Press-fit and staking station
With about 1414 N of usable thrust at 0.5 MPa and identical force on both strokes, the cylinder can press a bearing into a housing then retract the part ejector at the same rating.
Heavy slide indexing on a machining line
The 175 mm stroke within a body about 50% shorter than an ISO 15552 profile cylinder fits inside a guarded fixture, while the back-end rod drives a position flag past a switch when the -S magnet is ordered.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X175B the Right Cylinder?
At 80 mm bore this sits in the heavy-thrust band: 2356.2 N at 0.5 MPa both directions, between the 63 mm bore (1458.1 N) and the 100 mm bore (3769.9 N). If your load needs under 1450 N, the ACED63 saves space; if it needs over 2400 N, step up to the 100 mm bore. The 175 mm stroke is within the 300 mm maximum standard stroke for this bore, so it ships as a standard build. Remember the piston drifts if air is lost - for a held vertical load add a rod lock or pilot check valve. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles mount on the ISO 21287 face, and the male rod thread (B) suits directly threaded tooling.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X175B FAQ
Yes - the double-rod design means both strokes use the rod-side area, so force is equal both ways: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, with a maximum of 480.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/8" port matches the 80 mm bore.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, roller-burnished bore, S45C hard-chrome-plated 20 mm rods and fixed TPU bumpers at both ends. Sensing is not included: this model has no magnet, so order the -S version to enable CMSE / DMSE switches in the body slots. Mounting uses FA/FB flange, LB foot or FTC brackets with I/Y rod knuckles, and the male rod thread on each end accepts directly threaded fixtures.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X175B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.