Airtac ACED Double-acting Compact Cylinder ACED80X175S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X175S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X175S
A double acting AirTAC ACED80X175S pushes with a 20 mm rod on BOTH covers, so the 80 mm bore delivers the same 2356.2 N at 0.5 MPa (3298.7 N at 0.7 MPa) on every stroke - the rod-side area is identical in each direction. The through-rod resists rotation and side load and gives a symmetric mount, and the back-end rod can carry a sensor flag. The -S code means the magnet is fitted, so CMSE / DMSE reed or solid-state switches can be clamped straight onto the body slots.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this 175 mm stroke unit fits tight machine frames and sliding guards. The hard-anodized aluminium body carries a hard-chrome plated S45C rod, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi).
Airtac ACED Double-acting Compact Cylinder ACED80X175S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X175S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X175S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X175S Is Used
Pallet stacker lift column
The equal 2356.2 N force in both directions and about 120 kg of vertical lift with margin suit a lifting column that raises and lowers loaded pallets in a warehouse cell, guided by the through-rod's resistance to rotation.
Sliding guard interlock actuator
With the -S magnet fitted, CMSE or DMSE switches report guard open and closed positions on a machine enclosure door driven across a 175 mm travel, all inside a body about 50% shorter than an ISO 15552 profile cylinder.
Reciprocating spray-arm driver
A car-wash or parts-washing gantry can use the rear rod to carry a nozzle flag while the front rod drives the arm, both strokes pushing at 3298.7 N at 0.7 MPa with the fixed TPU bumpers absorbing each reversal.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X175S the Right Cylinder?
At 80 mm bore you sit between the 63 mm (1458.1 N at 0.5 MPa) and the 100 mm (3769.9 N at 0.5 MPa) - choose 63 if your load is under 1400 N, step to 100 for heavy presses or clamps above 2400 N. The 175 mm stroke is well inside the 300 mm maximum standard stroke for this bore, so it ships as a catalogue item. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face. Remember this is a plain double-rod cylinder: when air is lost the piston drifts, so add a rod lock or pilot check if the load must be held.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X175S FAQ
Yes - the double-rod design puts a 20 mm rod through both covers, so both strokes use the rod-side area. At 0.5 MPa you get 2356.2 N in each direction, at 0.7 MPa you get 3298.7 N in each direction, and the maximum at 1.0 MPa is 480.5 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure.
The ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 175 mm stroke fits where a full-length cylinder will not. The -S code on this model means the position magnet is fitted, so CMSE / DMSE switches mount in the body slots for end-of-stroke or mid-stroke sensing. A fixed TPU bumper at each end absorbs end-of-stroke energy, and FA/FB flange, LB foot or FTC mounting bolts straight to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.