Airtac ACED Double-acting Compact Cylinder ACED80X200
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X200 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X200
The ACED80X200 is a double acting, double-rod compact cylinder built to the ISO 21287 short-body format. With an 80 mm bore and a 200 mm stroke, a piston rod exits both covers, so thrust is identical on each stroke: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, because both sides work on the rod-side area. The through-rod resists rotation and side load and gives a symmetric mount, while the rear rod can carry a sensor flag or a second tooling plate. Air supply is 0.15-1.0 MPa (22-145 psi), speed range is 30-500 mm/s, and the 1/8" port matches the 80 mm bore.
The hard-anodized aluminium body with a roller-burnished bore and the S45C hard-chrome plated rod shrugs off wear in high-cycle service, and a fixed TPU bumper at each end absorbs end-of-stroke shock. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses, gantries and guarding where a full-length body will not fit. FA/FB flanges, LB feet and FTC brackets bolt straight to the ISO 21287 face, and the optional -S magnet enables CMSE / DMSE switches when ordered.
Airtac ACED Double-acting Compact Cylinder ACED80X200 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X200 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X200
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X200 Is Used
Pneumatic press and forming station
The 2356.2 N thrust at 0.5 MPa (3298.7 N at 0.7 MPa) suits light pressing, staking and forming of aluminium brackets and plastic housings, with equal force on the return stroke to strip the part off the tool.
Symmetric gantry with dual tooling
A rod on each cover lets one cylinder drive a tool plate on the front rod and a counter-guide or sensor flag on the rear rod, cutting the body length by about half versus an ISO 15552 profile cylinder in the same gantry.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X200 the Right Cylinder?
At 80 mm bore this is a mid-heavy class: 2356.2 N at 0.5 MPa in both directions. Step down to the 63 mm bore (1458.1 N) for lighter clamping, or up to the 100 mm bore (3769.9 N) when the part weight or press force demands more. The 200 mm stroke sits inside the 300 mm maximum standard stroke for this bore, so it is a catalogue item, not a made-to-order build. Remember that a plain double-rod cylinder drifts when air is lost; for a held load add a rod lock or pilot check valve. Choose the female M12x1.25 rod thread as coded here, or order the B variant for a male thread, and add -S only if you need CMSE / DMSE position switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X200 FAQ
Yes. Because a rod exits both covers, both strokes use the rod-side area, so output is equal both ways: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, with a maximum of 480.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the port is 1/8" for this 80 mm bore.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, an S45C hard-chrome plated 20 mm rod through both covers, and a fixed TPU bumper at each end that absorbs end-of-stroke energy. FA/FB flange, LB foot and FTC mounting bolt to the standard face. Switches are possible only with the optional -S magnet code, which allows CMSE / DMSE sensors; without -S there is no magnet and no sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.