Airtac ACED Double-acting Compact Cylinder ACED80X225
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X225 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 225mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke225 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X225
A double acting compact cylinder built to ISO 21287, the ACED80X225 pushes a 20 mm rod out of BOTH covers, so thrust is identical on each stroke: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, either direction. The 80 mm bore runs on 0.15-1.0 MPa (22-145 psi) of filtered air at 30-500 mm/s, with a fixed TPU bumper at each end to soften the stroke terminations.
The hard-anodized aluminium body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why this bore class fits deep inside press fixtures and sliding gantries. Because the through-rod resists rotation and side load, the free rod at the rear can carry a sensor flag or a second tool. Air ports are 1/8" and the female rod thread is M12x1.75.
Airtac ACED Double-acting Compact Cylinder ACED80X225 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X225 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X225
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X225 Is Used
Press fixture ejection
The rear rod kicks formed brackets off the mandrel while the front rod ejects, both strokes delivering 2356.2 N at 0.5 MPa in a 225 mm envelope that clears the die shoe.
Gantry pick-and-place
A 72 kg vertical lift margin handles aluminium housings between two conveyor lanes, with the through-rod keeping the gripper plate from rotating at 30-500 mm/s.
Reciprocating screen shaker
Symmetric force both ways drives a sieving tray evenly, and the fixed TPU bumpers at each end absorb the reversal shock without external stops.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X225 the Right Cylinder?
At 2356.2 N per side at 0.5 MPa, the 80 mm bore sits between the 63 mm (1458.1 N) and 100 mm (3769.9 N) choices - step down for lighter clamping, up for heavy die work. Remember it drifts when air is lost, so add a rod lock or pilot check if the load must stay put. FA/FB flanges, LB feet and FTC brackets bolt to the ISO 21287 face, and I/Y knuckles suit the 20 mm rods. This version has no magnet; order the -S code if you need CMSE / DMSE switch positions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X225 FAQ
Yes - a rod exits both covers, so every stroke uses the rod-side area of the 80 mm bore. Output is 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, equal push and pull, with a peak of 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
It is an ISO 21287 compact cylinder, about 50% shorter in mounting length than an ISO 15552 profile cylinder, with a hard-anodized aluminium body and S45C hard-chrome plated 20 mm rods. A fixed TPU bumper sits at each end of the 225 mm stroke. FA/FB flange, LB foot and FTC brackets mount on the standard face. The magnet is the optional -S code - this model has none, so add -S if you want CMSE / DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X225
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.