This model is discontinued
AirTAC has phased out the MALD series. You can still order this code here: we ship the direct replacement MBLD32X75S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLD replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X75-S
The AirTAC Airtac MALD Aluminum Alloy Mini Cylinder MALD32X75-S is a double-acting, double-rod aluminum mini cylinder: a rod exits both ends of the Ø32mm bore, so push and pull force are equal. This model is discontinued — the direct replacement is the MBLD32X75-S, matching bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- StatusDiscontinued → MBLD32X75-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X75-S
The AirTAC MALD32X75-S is a discontinued double-acting, double-rod cylinder. A 32mm bore with a 75mm stroke yields 346N of force in both directions at 0.5MPa. The direct replacement is the MBLD32X75-S, matching the bore, stroke, G1/8 port, and mounting.
This -S SKU includes a magnet for CS1-M/DS1-M switches; the MBLD upgrade requires CMSG/DMSG/EMSG sensors. The MALD uses threaded covers, while the MBLD features a riveted rolling-packed body. Twin Ø12mm rods provide anti-rotation guidance and double the bearing area for tooling. Fixed rubber bumpers absorb end impacts.
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X75-S Technical Specifications
| Model | Airtac MALD Aluminum Alloy Mini Cylinder MALD32X75-S |
|---|---|
| Series | MALD double-rod mini cylinder (discontinued) |
| Replacement | MBLD32X75-S |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Double-rod types have no back-cover code and no SDB pivot; mount on the body, LB foot or FA flange. The MBLD32X75-S carries the same ratings.
Output Force — Equal Both Ways (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
A rod exits both ends, so the effective area — and force — is equal in both directions. The MBLD32X75-S matches these values.
Model Code: Airtac MALD Aluminum Alloy Mini Cylinder MALD32X75-S
| MALD | Double-rod aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×75 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLD uses CMSG/DMSG/EMSG). |
Replacement: MALD → MBLD. No back-cover (CA/U/CM) and no SDB on double-rod. Mounting: LB / FA.
Where the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X75-S Is Used
PCB Edge Routing Station
Drives a synchronized routing spindle on a 75mm stroke. The twin rods prevent yaw during plunge cuts, using the 346N equal force for consistent chip load.
Bottle Capper Headspace
Applies 346N of clamping pressure to apply caps. The rear rod carries a cam to actuate a capping head, keeping front and rear forces balanced.
Indexing Conveyor Pallet
Shifts a light pallet 75mm between machining stations. The double-rod geometry resists torsional side-load from the pallet's inertia during rapid 30-800mm/s transits.
Replacing the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X75-S with MBLD32X75-S
To replace the MALD32X75-S, specify the MBLD32X75-S. Confirm the 32mm bore, 75mm stroke, G1/8 port, and M10x1.25 rod thread. Mount via FA flange or LB foot on the body, as no back cover or SDB exists. Update controls from CS1-M/DS1-M to CMSG/DMSG/EMSG sensors.
Size on the equal 346N push/pull force. If stepping down, the 25mm bore offers 206N at 0.5MPa. If scaling up, the 40mm bore provides 528N. The twin rods resist torsional stress on the 75mm stroke.
Upgrade checklist
- ✓ Order the MBLD32X75-S (same bore/stroke/force)
- ✓ Force equal both ways (346 N at 0.5 MPa)
- ✓ Twin rods for anti-rotation / rear flag
- ✓ No back cover / SDB — plan a body or FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Protect both rod ends from side load on long strokes.
- check No back-cover / SDB on double-rod — use body / FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLD32X75-S instead of this discontinued model.
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X75-S FAQ
Yes, the MALD32X75-S is discontinued. The direct replacement is the MBLD32X75-S, matching the 32mm bore, 75mm stroke, G1/8 port, and LB/FA mounting. You must update your sensors from CS1-M/DS1-M to CMSG/DMSG/EMSG.
Force is equal both ways because rods exit both ends, making the piston area identical on each side. It delivers 346N push and 346N pull at 0.5MPa, 484N at 0.7MPa, and a maximum of 70kgf at 1.0MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLD32X75-S replaces this model 1:1.
Fast Dispatch
MBLD replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLD Replacements
Request a Quote (Airtac MALD Aluminum Alloy Mini Cylinder MALD32X75-S → MBLD32X75-S)
Tell us the quantity and destination — we quote the direct MBLD32X75-S replacement with price, stock and lead time, usually within 7-8 hours.