This model is discontinued
AirTAC has phased out the MALD series. You can still order this code here: we ship the direct replacement MBLD32X80S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The MBLD replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X80-S
The AirTAC Airtac MALD Aluminum Alloy Mini Cylinder MALD32X80-S is a double-acting, double-rod aluminum mini cylinder: a rod exits both ends of the Ø32mm bore, so push and pull force are equal. This model is discontinued — the direct replacement is the MBLD32X80-S, matching bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke80 mm
- Port sizeG1/8
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- StatusDiscontinued → MBLD32X80-S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X80-S
The AirTAC MALD32X80-S is a discontinued double-acting, double-rod pneumatic cylinder. A 12mm carbon-steel rod exits both ends, yielding equal push and pull force of 346 N each way at 0.5 MPa. The direct replacement is the MBLD32X80-S, matching the 32mm bore, 80mm stroke, G1/8 port and mounting.
This MALD32X80-S uses a fixed rubber bumper and threaded covers, whereas the MBLD upgrade features a riveted rolling-packed body. The -S magnet works with older CS1-M / DS1-M switches, which must be upgraded to CMSG / DMSG / EMSG sensors on the MBLD. Twin rods double the bearing area and resist torsional loads, allowing a rear flag or cam to be mounted on the opposite rod.
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X80-S Technical Specifications
| Model | Airtac MALD Aluminum Alloy Mini Cylinder MALD32X80-S |
|---|---|
| Series | MALD double-rod mini cylinder (discontinued) |
| Replacement | MBLD32X80-S |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.1 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 500 mm |
Double-rod types have no back-cover code and no SDB pivot; mount on the body, LB foot or FA flange. The MBLD32X80-S carries the same ratings.
Output Force — Equal Both Ways (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | 484 N |
| Max (@1.0 MPa) | 70 kgf | |
A rod exits both ends, so the effective area — and force — is equal in both directions. The MBLD32X80-S matches these values.
Model Code: Airtac MALD Aluminum Alloy Mini Cylinder MALD32X80-S
| MALD | Double-rod aluminum mini cylinder, double acting (discontinued). |
|---|---|
| 32 | Bore size in mm (20/25/32/40). |
| ×80 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MBLD uses CMSG/DMSG/EMSG). |
Replacement: MALD → MBLD. No back-cover (CA/U/CM) and no SDB on double-rod. Mounting: LB / FA.
Where the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X80-S Is Used
PCB Depanelling Press
The equal 346 N push and pull force drives a guided blade fixture, ensuring clean cuts on populated circuit boards without rotational drift.
Bottle Capping Turret
Twin rods resist the high torsional load from capping heads, while the 80mm stroke provides precise cap seating on a rotary filler.
Dual-End Pick and Place
A rear-mounted flag on the opposite rod triggers a legacy CS1-M sensor, allowing compact part transfer in tight electronics assembly bays.
Replacing the Airtac MALD Aluminum Alloy Mini Cylinder MALD32X80-S with MBLD32X80-S
To replace the MALD32X80-S, order the MBLD32X80-S. Confirm the 32mm bore, 80mm stroke, G1/8 port, M10x1.25 rod-end thread and FA or LB mounting. The MBLD has no back cover or SDB valve option. Because the -S magnet is present, plan to swap the legacy CS1-M / DS1-M switches for CMSG / DMSG / EMSG sensors.
Size on the equal force: this bore yields 346 N each way at 0.5 MPa. To step down, the 25mm bore provides 206 N each way. To step up, the 40mm bore provides 528 N each way and upgrades the port to G1/4.
Upgrade checklist
- ✓ Order the MBLD32X80-S (same bore/stroke/force)
- ✓ Force equal both ways (346 N at 0.5 MPa)
- ✓ Twin rods for anti-rotation / rear flag
- ✓ No back cover / SDB — plan a body or FA/LB mount
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.1 – 1.0 MPa operating pressure.
- check Protect both rod ends from side load on long strokes.
- check No back-cover / SDB on double-rod — use body / FA / LB.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the MBLD32X80-S instead of this discontinued model.
Airtac MALD Aluminum Alloy Mini Cylinder MALD32X80-S FAQ
Yes, the MALD32X80-S is discontinued. The direct replacement is the MBLD32X80-S, matching the 32mm bore, 80mm stroke, G1/8 port and force. You must upgrade the switches from CS1-M / DS1-M to CMSG / DMSG / EMSG.
Force is equal both ways: 346 N at 0.5 MPa, 484 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa. It uses a fixed rubber bumper for end-of-stroke impact, not an adjustable cushion or a load-holding lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The MBLD32X80-S replaces this model 1:1.
Fast Dispatch
MBLD replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended AirTAC MBLD Replacements
Request a Quote (Airtac MALD Aluminum Alloy Mini Cylinder MALD32X80-S → MBLD32X80-S)
Tell us the quantity and destination — we quote the direct MBLD32X80-S replacement with price, stock and lead time, usually within 7-8 hours.