This model is discontinued
AirTAC has phased out the MSAL series. You can still order this code here: we ship the direct replacement MSBL25X10SCA, with the same bore, stroke, output force, port and mounting, so it fits the same application. The replacement upgrades to a riveted rolling-packed body and CMSG / DMSG / EMSG sensors (the MAL used CS1-M / DS1-M).
Airtac MSAL Front Single Acting Compact Cylinder MSAL25X10SCA
The AirTAC Airtac MSAL Front Single Acting Compact Cylinder MSAL25X10SCA is a single acting, push (spring return) aluminum-barrel mini cylinder with a Ø25mm bore and 10mm stroke, G1/8 ports and a fixed rubber bumper. Air drives the push (work) stroke and the spring returns the rod — it rests retracted on air loss. This model is discontinued; the direct replacement is the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X10SCA.
- BoreØ25 mm
- Stroke10 mm
- Port sizeG1/8
- Acting typeSingle acting, push (spring return)
- Rod threadM10×1.25
- StatusDiscontinued → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X10SCA
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MSAL Front Single Acting Compact Cylinder MSAL25X10SCA
The AirTAC MSAL25X10SCA is a discontinued single-acting push, spring-return mini cylinder. Air extends the rod for the work stroke; an internal spring retracts it to a fail-safe home when air is removed. This 25 mm bore delivers a usable push force of 176.4 N at 0.5 MPa, and the direct replacement is the MSBL25X10SCA.
This SKU includes the -S magnet for position sensing. The older MSAL uses CS1-M or DS1-M reed switches, whereas the MSBL upgrade accepts CMSG, DMSG, or EMSG sensors. The MSAL features threaded covers, while the current MSBL uses a riveted rolling-packed body. The CA back cover provides a pivot clevis for arcing loads, and the fixed rubber bumper absorbs end-of-stroke impact without any adjustable cushion.
Airtac MSAL Front Single Acting Compact Cylinder MSAL25X10SCA Technical Specifications
| Model | Airtac MSAL Front Single Acting Compact Cylinder MSAL25X10SCA |
|---|---|
| Series | MAL single-acting mini cylinder (discontinued) |
| Replacement | AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X10SCA |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Single acting, push (spring return) |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed rubber bumper |
| Max standard stroke | Up to 150 mm |
Single-acting minimum working pressure is 0.2 MPa (the air must overcome the return spring). Do not apply an external load during the spring return stroke. The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X10SCA carries the same single-acting ratings.
Usable Push Force (Ø25mm)
| Pressure | Push force (net of spring) |
|---|---|
| 0.5 MPa | 176.4 N |
| 0.7 MPa | 274.5 N |
Usable single-acting force after the return spring — lower than a same-bore double-acting cylinder. Size with a margin.
Model Code: Airtac MSAL Front Single Acting Compact Cylinder MSAL25X10SCA
| MSAL | Single acting, push (spring return) aluminum-barrel mini cylinder (discontinued). |
|---|---|
| 25 | Bore size in mm (20/25/32/40). |
| ×10 | Stroke length in mm. |
| S | Optional magnet for a CS1-M / DS1-M sensor (MSBL uses CMSG/DMSG/EMSG). |
| CA / U / CM | Back cover: CA pivot, U flat-end or CM round-end. |
Replacement: MSAL → MSBL. Related: MTAL/MTBL (single-acting pull), MAL/MBL (double acting).
Where the Airtac MSAL Front Single Acting Compact Cylinder MSAL25X10SCA Is Used
PCB Ejector Pin
Pushes finished circuit boards out of an inspection fixture using 176.4 N at 0.5 MPa; the spring safely retracts the pin when air drops.
Packaging Flap Deflector
Extends 10 mm to guide carton flaps on a rotary packaging line, relying on the CA pivot clevis to absorb angular machine motion.
Light-Duty Parts Stop
Acts as a temporary stop gate for plastic bottles on a conveyor; the fail-safe spring return clears the path instantly on air loss.
Replacing the Airtac MSAL Front Single Acting Compact Cylinder MSAL25X10SCA with AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X10SCA
To replace this MSAL25X10SCA, install the MSBL25X10SCA: it matches the 25 mm bore, 10 mm stroke, G1/8 port, PT threads, CA pivot cover, and magnet. Remember the 0.2 MPa minimum pressure required to overcome the return spring, and apply no external load on the spring return stroke. The -S magnet requires changing from CS1-M/DS1-M to CMSG/DMSG/EMSG switches.
If sizing your force requirements, stepping down to a 20 mm bore yields 106.8 N at 0.5 MPa, while stepping up to a 32 mm bore provides 317.7 N at 0.5 MPa. For this 10 mm stroke, side-load risk is minimal, but ensure the CA clevis pin is free to swing to prevent rod binding.
Upgrade checklist
- ✓ Order the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X10SCA (same bore/stroke/force)
- ✓ Same push direction and retracted fail-safe home
- ✓ Min 0.2 MPa; no external load on the spring return
- ✓ Sensor: swap CS1-M/DS1-M → CMSG/DMSG/EMSG
- ✓ Confirm back cover (CA / U) and thread (PT/NPT/G)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa (min 0.2 to overcome the spring).
- check Apply no external load on the spring return stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are threaded — not for field disassembly.
- check For new builds, specify the AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X10SCA instead of this discontinued model.
Airtac MSAL Front Single Acting Compact Cylinder MSAL25X10SCA FAQ
Yes, the MSAL25X10SCA is discontinued. The direct replacement is the MSBL25X10SCA, which matches the 25 mm bore, 10 mm stroke, CA pivot back cover, and G1/8 port. You will only need to update your position sensors from the older CS1-M/DS1-M to the CMSG/DMSG/EMSG family.
The usable push force is 176.4 N at 0.5 MPa and 274.5 N at 0.7 MPa (maximum 28 kgf). Because it is single-acting push with a return spring, the minimum operating pressure is 0.2 MPa to ensure air overcomes the spring.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
Direct Upgrade
The AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X10SCA replaces this model 1:1.
Fast Dispatch
MSBL replacements are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Recommended MSBL Replacements
Request a Quote (Airtac MSAL Front Single Acting Compact Cylinder MSAL25X10SCA → AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X10SCA)
Tell us the quantity and destination — we quote the direct AIRTACMSBLFRONTSINGLEACTINGCOMPACTCYLINDERMSBL25X10SCA replacement with price, stock and lead time, usually within 7-8 hours.